When The Message "Please Add Toner." Appears; Replacing The Toner Bottle - imagistics DF200 Operating Manual

10-10

2. When the Message "Please add toner." Appears

Replacing the Toner Bottle

1
Open the Toner Bottle Cover.
The message shown on the left appears when toner
is low.
Replace the Toner Bottle as soon as possible once
the message has appeared.
You can still make copies, but the image density
will become lighter and lighter.
4016P175CA
When toner has run out, the message shown on the
left appears and you can no longer start a new print
cycle.
Replace the Toner Bottle with a new one by
following the procedure given below.
4016P176CA
2
Gently pull out the used bottle.
4015O110AB
NOTE
If the Toner Bottle Cover is opened while the
bottle is turning, the bottle may be locked in
place. If this happens, close the cover, wait for
the bottle to stop, and try again.
4015O111AB