imagistics DF200 Operating Manual page 57

<Using the SADF Mode>
In this mode, you insert your originals one by one into the document feeder to make a copy or copies.
When you insert the original, the machine automatically starts the copy cycle.
NOTES
• Originals appropriate for the SADF Mode.
Type: Plain paper
Weight: 9-1/4 lb to 53-1/4 lb
Size: 11 × 17 L to 5-1/2 × 8-1/2
• The following features will be canceled when using the SADF mode:
2-sided Original, 2-in-1 Original, Book, Sort, Group, Staple, Cover, Page Insertion, Number
Stamping, manual feeding, Original Direction, and Margin.
1
Open the Single Feed Tray and slide the
Guide Plate to the size of the original.
2
Make sure that the Start key is lit green.
Then insert the original face down into the
Single Feed Tray.
NOTES
• Be sure to place only one original at a time.
• Be sure to correct any fold or curl in the
original beforehand.
3
The original is automatically taken up and
the copy cycle starts.
4
Making sure that the Start key lights green
again, insert the next original.
1166O025AA
1166O026AB
2-29
5. Placing the Original