Settings In User Management; Setting The Confirmation Beep And Alarm Volume - imagistics DF200 Operating Manual

6. Settings in User Management

Setting the Confirmation Beep and Alarm Volume

Confirmation Beep
The volume of the confirmation beep that can be
heard when a control panel key is pressed may be
adjusted in the range between 0 (zero) and 5
(high).
The initial setting is "3."
Alarm Volume
The volume of the alarm beep that sounds when,
for example, a paper misfeed occurs, may be
adjusted in the range between 0 (zero) and 5
(high).
The initial setting is "3."
1
Press the Utility key.
2
Touch [User Management].
Line Monitor Volume
The volume of the line monitor that can be heard
from the monitor speaker during facsimile
transmission may be adjusted in the range between
0 (zero) and 5 (large).
The initial setting is "3."
3
Select the desired function.
For example, touch [Confirmation Beep].
1166O243EA
4
Touch [ ] or [ ] to adjust the volume to the
desired level and then touch [Enter].
4016P125CA
7-17
4017P126EA
4016P127CA