Adjusting Facsimile Reduction - imagistics DF200 Operating Manual

5-12
2. Sending Documents

Adjusting Facsimile Reduction

Reduction can be adjusted according to the paper size on the receiving side.
A document is normally sent in its original size, but it is automatically reduced as may be necessary to the
paper size of the recipient's fax machine (Auto Size).
If automatic size reduction is not required or the document must be sent in its original size, select the non-
reduction function (No Reduction). Then, only the area of the scanned document that matches the paper
size of the recipient's fax machine will be sent.
Transmitter
Ledger L (11×17 L)
Transmitter
Ledger L (11×17 L)
NOTES
• After transmission, the document may be reduced in size when printed depending on the model of the
fax machine at the destination.
×
• When an
Ledger L (11 17 L)
size at the destination. To send an
No Reduction.
Recipient's Paper Size
Ledger L (11×17 L)
Legal L
Letter L
Auto Size
No Reduction
or Legal L document is sent, it is automatically reduced to match the paper
×
or Legal L document in its original size, select
Ledger L (11 17 L)
Document Size
Ledger L (11×17 L)
Original Size
Reduced to Legal L
Reduced to Letter L
Recipient
1166O203AA
Letter L
Recipient
Letter L
1166O204AE
Legal L
Original Size
Original Size
Reduced to Letter L