Real Time Transmission - imagistics DF200 Operating Manual

6-6
1.Various Ways of Transmitting Documents

Real Time Transmission

You can use the Real Time Transmission function to send a document one page at a time in accordance
with the transmission status. This function can be used to ensure accurate transmission of a large number
of documents.
NOTES
• Use the Document Feed Tray of the Automatic Document Feeder for Real Time Transmission. Neither
the Duplexing Document Feeder nor the Original Glass should be used.
• Real Time Transmission cannot be used while another document is being sent or received.
• Only a single destination can be set at a time for Real Time Transmission.
• Timer Transmission or 2-Sided Transmission cannot be used at the same time with Real Time
Transmission.
1
Load the document in the Document Feed
Tray.
2
Touch [FAX Menu] and then [Set 1].
3
Touch [Real-Time].
4
Set the destination.
5
Press the Start key.
NOTE
Utility Mode allows you to select Real Time
Transmission as the default setting for each
account.
4016P283CA
4016P284CA
p.8-38, 9-28