When The Message "Cannot Staple." Appears; Clearing The Staple Misfeed - imagistics DF200 Operating Manual

10-34

6. When the Message "Cannot staple." Appears

Clearing the Staple Misfeed

Finisher 9747/Finisher 9748
1
Holding the Grip, slide the Finisher away
from the machine.
2
<Only when Finisher 9747 is mounted>
Open Misfeed Clearing Guide [FN7] on the
right side of the Finisher.
If a staple misfeed occurs, the message shown on
the left will appear.
Clear the staple misfed according to the procedure
given below.
4016P181CA
3
Turn the dial to the left to move the Staple
Unit (two Stapler Units in 9747) toward the
center.
4015O087AB
4
Pull the Staple Cartridge out to the front.
<Finisher 9747>
FN7
4015O088AB
NOTE
Two Staple Cartridges are mounted in Finisher
9747.
4002O177AB
Stapler 1
Stapler 2
4002O178AA