Settings For Report; Printing Reports And Lists - imagistics DF200 Operating Manual

7. Settings for Report

Printing Reports and Lists

Report 1
TX Act. Report
The TX Act. Report can be printed to check the
document number, transmission start time,
destination, mode, number of pages transmitted,
result, and other data.
The factory setting for this report is to
automatically print one after each 50
transmissions. p.9-32
RX Act. Report
The RX Act. Report can be printed to check the
document number, reception start time, duration,
destination, mode, number of pages printed, result,
and other data.
The factory setting for this report is to
automatically print one after each 50
transmissions. p.9-32
Bulletin Board List
A list of documents posted on the bulletin board
can be printed as a report.
Account List
When the Copy Track function has been set, a list
of account information including the settings for
communication data can be printed for check.
Each account can print his/her own list only. The
administrator, on the other hand, can print lists of
all accounts registered with the system.
Report 2
One-Touch List
The destinations programmed in one-touch keys
can be printed on a list in order of key number for
confirmation.
Abbr. # List
The destinations programmed as abbreviated
dialing can be printed on a list in order of key
number for confirmation.
Fax Program List
Details of communications settings (facsimile
programs) programmed as one-touch programs
can be printed as a report.
Relay Group List
Details of groups programmed for Relay
Broadcast Transmission can be printed as a report.
p.9-33
7-21