Chain Dialing - imagistics DF200 Operating Manual

5-16
2. Sending Documents

Chain Dialing

Multiple one-touch keys can be used together to call a single destination. This is called the Chain Dialing
function. For example, preprogrammed switchboard and extension numbers for a single destination on
different one-touch keys can be combined for dialing.
Chain Dialing is possible by using 10-Key Dialing or Abbreviated Dialing in combination with a one-
touch key.
* Numbers up to 192 digits long can be dialed when Chain Dialing is used for transmission. (Numbers up
to 64 digits long are displayed on the Touch Panel.)
1
Load the document.
2
Touch [Chain Dial].
Useful Tip
The default fax screen appears that has been set
with Priority FAX Screen.
3
4016P269CA
Useful Tips
p.9-19 • To check the details, touch [10-Key Dialing]
•
• To continue the number, touch another one-
Set the destination.
<Using one-touch keys>
Touch [One-Touch] and then touch the
corresponding one-touch key.
and move the cursor to
key. Then, the number programmed in that
particular one-touch key is displayed.
is displayed when a one-touch key is
touched.
touch key to set the next part of the number.
4016P270CB
using [ ← ] or [ → ]