Making Different Types Of Copy; Reading The Table - imagistics DF200 Operating Manual

4-2

1. Making Different Types of Copy

These pages explain how to combine different functions to make various types of copy.

Reading the Table

1 2
Intended Type of Copy
2
1
3
2
3
1
1. Shows whether the copy is 1-sided or 2-sided.
2. Shows what type of copy you want to make.
3. Shows how to load your original.
4. Shows which to set, either Single-Sided, Double-Sided, 2in1, or 4in1 for Original
5. Shows which to set, either Corner Staple, 2-Point Staple, or Hole-Punch for the finishing function.
p.3-18
6. Shows the margin position to be set for your original.
7. Shows the file margin function to be set as an auxiliary function.
8. Shows that the stapling position or hole punch positions must be set using the Select Position key.
p.3-22, p.3-24
* The marker "-" in the table indicates that no key setting is necessary.
3 4
Loading the
Copy
Originals
Double-
Sided
Hole punch
Double-
Sided
p.2-26
5 6
Finishing File
Margin
Functions Margin
Corner
Staple
2-Point
Staple
p.3-36
p.3-54
7 8
Select
Position
Copy. p.3-31