imagistics DF200 Operating Manual page 237

1/6
Memory Recall
<DF270/DF370 only>
Select whether to enable ("ON") the function that
allows you to use the same image data of the copy
cycle that has just been completed, or not ("OFF").
The initial setting is "OFF."
Mixed Original Detection
Select whether to default to Mixed Original
Detection ("ON") or not ("OFF").
The initial setting is "OFF."
* If the following combination is set in User's
Choice, the Mixed Orig. Detection will be
automatically canceled and the copies will be
made in 1-Sided 2-Sided copy mode.
• Original Copy Default
: 1-Sided
• Mixed Orig. Detection: ON
Date/Time Set
Set the date and current time-of-day.
It is also possible to set Time Zone and Daylight
Svgs. Time.
Time Zone can range between -12:00 and +12:00,
variable in 30-min. increments.
The initial setting is "-05:00."
For Daylight Svgs. Time, select whether to
automatically set the daylight saving time or not.
The initial setting is "Auto."
* For Time Zone, set the difference from the
standard time that is attached on the header of e-
mail for e-mail transmission and reception. To
use the e-mail function, Network Application
kit-2 is required.
Language Selected
Select the language of the Touch Panel messages.
The initial setting is "English."
2-Sided
1. Making the User's Choice Settings
2/6
Original Copy Default
Specify the original copy type automatically
selected when power is turned ON, or panel reset.
The initial setting is 1-Sided
Auto Paper/Auto Size
Specify the default mode selected automatically
when power is turned ON, or panel reset, either
"Auto Paper," "Auto Size," or "Manual."
The initial setting is "Auto Paper."
Drawer Priority
Specify the default paper source that is
automatically selected.
The initial setting is "1" (1st Drawer).
Special Paper
Designate a drawer for special paper.
The initial setting is "Normal" for all drawers.
* For special paper setting, see "Special Paper
Setting." p.3-6
Multiple-in-1 and Booklet Copy Zoom
Select whether to enable ("ON") or disable
("OFF") recalling a default zoom ratio for 4in1,
2in1, Booklet Creation, and 2in1 Separation.
4in1 : 0.500 (DF270/DF370 only)
2in1 : 0.647
Booklet : 0.647 (DF270/DF370 only)
2in1 Separation : 1.545
The initial setting is "ON."
8-3
1-Sided.