Fax Trans. Settings Procedures - imagistics DF200 Operating Manual

9-30
7. Settings for FAX Trans. Settings

FAX Trans. Settings Procedures

1
For how to show the [FAX Trans. Settings]
key, see "Setting Admin. Management."
p.9-2
2
Touch [FAX Trans. Settings].
3
Touch [TX Set 1] ([TX Set 2] or [TX Set 3]).
4
Select the function to be set.
<For "Priority Quality">
Touch the appropriate key.
Useful Tips
4016P473CA
• The same procedure applies to "Priority
Contrast, " "Com. Mode," "TX," "TSI,"
"Password TX," "TX Marker," "Relay-Station
Print," and "Line Selection."
• When "Select" is chosen for "Line Selection, "
be sure to specify the line for each
transmission.
NOTE for TSI Setting
The TSI is required on all facsimile
transmissions. It is unlawful to turn this feature
off. p.viii
4017P474EA
5
Touch [Enter].
4016P475CA