Adjusting Facsimile Contrast - imagistics DF200 Operating Manual

5-10
2. Sending Documents

Adjusting Facsimile Contrast

Contrast may be adjusted to vary in five steps according to the image density of the characters and
darkness of the paper.
For example, if the characters are printed on colored paper, adjust contrast to ensure that the characters
will be legible on the document received by facsimile.
<Adjusting Contrast According to Document Type>
• Dark colored paper (newspaper, blueprints, etc.): [Lighter]
• Normal documents
• Faint or colored print
Adjusting Contrast
1
Load the document.
2
Touch [Quality & Reduction].
3
Touch [Contrast] and select the appropriate
contrast level according to the document
type.
Useful Tip
The transmitted document gets lighter each time
[Lighter] is touched and gets darker each time
[Darker] is touched.
: [Normal]
: [Darker]
4
Set the destination.
5
Press the Start key.
4016P252CA
4016P261CA