Manual Bypass Copying - imagistics DF200 Operating Manual

Manual Bypass Copying

• Use Manual Bypass to make copies on paper not loaded in any drawer, or to copy onto OHP
transparencies, Card, or any other special paper.
• The setting of the paper size is needed for manual bypass copying.
Paper that Can be Used for Manual Bypass
Types of Paper
Plain paper (weighing 16 lb to 24 lb), recycled paper
Card (weighing 24-1/4 lb to 41-3/4 lb), labels
OHP transparencies
Paper Size
Max. Size: 11-11/16×17
Minimum Size: 3-9/16×5-1/2
Using the Manual Bypass Tray
1
Place the original on the Original Glass and
make the control panel settings.
2
Swing down the Manual Bypass Tray.
3
Slide the Paper Guides to the size of the
paper and insert a sheet of paper.
NOTES
4015O050AB
• Correct any curl if you are using Card.
• When making copies on Card, OHP
transparencies, or labels, the following
functions cannot be used: 2-sided copying,
Booklet Creation, Staple, and Hole Punch.
• The copy will be made on the side facing down.
Useful Tip
Continuous multiple copies can be made if Card,
OHP transparencies, or labels are loaded in the
1st Drawer.
2. Selecting the Paper
4015O051AB
p.10-2
3-7