imagistics DF200 Operating Manual page 69

• Changing the exposure level
• Leaving a file margin on the copy
• Using OHP Interleaving
9. Setting the number of copies.
From the 10-Key Pad, set the desired number of copies
to be made.
* The maximum number of copies that can be set is as
follows:
99 for DF200/DF270
999 for DF370
Useful Tip
There is no limit to the number of copies set in the initial
mode. Administrator Set can, however, be used to limit the
maximum number of copies to be set in the range from 1 to
99. p.9-4
* If you have entered an incorrect number, press the Clear
key, then enter the correct number.
10. Pressing the Start key.
When you press the Start key, the machine starts the
copy cycle.
* To stop the copy cycle, press the Stop key. p.2-37
Useful Tip
The number of pages of data the machine can scan at one time is about 40 for DF200 and about 120 for
DF270/DF370 based on an Letter standard original.
If optional Memory is installed, it expands the scanning capacity up to about 280 pages.
Selecting the exposure level.
7.Touch [Density].
p.3-42
Selecting the auxiliary functions.
8. Touch [Auxiliary].
p.3-44
3-3
1. Basic Copying Overview
4016P110CA
4016P068CA
1166O030AA
1166O244EA