Command Line Interface Settings; Basic Cli Settings; To View And Configure Basic Cli Settings; Table 12-2 Cli Configuration Settings - Lantronix PremierWave XC User Manual

Using the CLI

To enter Email command level: enable -> email 1
Using XML

Include in your file:

Command Line Interface Settings

The Command Line Interface settings allow you to control how users connect to and interact with
the PremierWave's command line. It is possible to configure access via the Telnet and SSH
protocols, in addition to general CLI options.

Basic CLI Settings

The basic CLI settings control general CLI access and usability options.
Command Line Interface
Configuration Settings
Login Password
Enable Level Password
Quit Connect Line
Inactivity Timeout
Line Authentication

To View and Configure Basic CLI Settings

Using Web Manager

To view CLI statistics, click CLI in the menu bar and select Statistics.

To configure basic CLI settings, click CLI in the menu bar and select Configuration.
Using the CLI

To enter CLI command level: enable -> config -> cli
PremierWave XC User Guide
<configgroup name="email" instance="1">

Table 12-2 CLI Configuration Settings

Description
Enter the password for logins by the admin account. The default password is
"PASS".
Enter the password for access to the Command Mode Enable level. There is
no password by default.
Set the string used to terminate a connect line session and resume the CLI.
Type <control> before any key to be pressed while holding down the Ctrl key,
for example, <control>L.
Set a time period in which the CLI session should disconnect if no data is
received. Enter 0 to disable. Blank the display field to restore the default.
Select Enabled or Disabled to enable or disable authentication for CLI
access on the serial lines.
12: Advanced Settings
83