To Configure Network 2 Sms Inbound Settings; Network 2 Roam Settings; Table 6-6 Network 2 (Wwan0) Sms Inbound Settings; Table 6-7 Network 2 (Wwan0) Roam Settings - Lantronix PremierWave XC User Manual

Network 2 (wwan0)
SMS Inbound Settings
State
Received Number

To Configure Network 2 SMS Inbound Settings

Using Web Manager

To modify Network 2 SMS Inbound settings, click Network on the menu bar and select
Network 2 → Configuration → SMS Inbound
Using the CLI

To enter the Network 2 SMS outbound command level:
enable -> config -> if 2
Using XML

Include in your file:

Network 2 Roam Settings

The table below shows the settings for Roam.
Network 2 (wwan0)
Roam Settings
State
PremierWave XC User Guide

Table 6-6 Network 2 (wwan0) SMS Inbound Settings

Description
Select Enabled or Disabled. When Enabled and the number matches an
entry in the whitelist, the device will handle the SMS. When Disabled, any
received SMS will be discarded.
Input the Received Number . At least 1 Received Number must be
configured for an SMS to be processed. A maximum of 5 Received Number
entries are allowed.
Note: Please input the Received Numbers to be included in device's
whitelist.
->link -> sms inbound
<configgroup name="sms inbound">

Table 6-7 Network 2 (wwan0) Roam Settings

Description
Select Enabled or Disabled.
prevents the device from roaming.
Enabled allows the device to roam.
6: Network Settings
Disabled
40