To Import Configuration In Xml Format; Failover Settings; Table 12-7 Import Configuration From Filesystem Settings; Table 12-8 Failover Settings - Lantronix PremierWave XC User Manual

Import Configuration from the Filesystem
This import option picks up settings from a file and your import selections of groups, lines, and
instances. The list of files can be viewed from the filesystem level of the CLI.
Import Configuration from
Filesystem Settings
Filename
Lines to Import
Groups to Import
Text List

To Import Configuration in XML Format

Using Web Manager

To import configuration, click XML in the menu bar and select Import Configuration.
Using the CLI

To enter the XML command level: enable -> xml

Failover Settings

Failover is the process of allowing a second Network interface to backup the Primary (WAN
Connection) configured interface. It uses a Dead Remote Host reachability (Ping) mechanism to
determine when it should switch over to the second interface. Failover automatically uses the
Primary Network configured DNS Servers as the Remote Host, if one is not configured.
Failover Settings
State
PremierWave XC User Guide

Table 12-7 Import Configuration from Filesystem Settings

Description
Enter the name of the file on the PremierWave XC (local to its filesystem)
that contains XCR data.
Select filter instances to be imported in the line, serial, tunnel and terminal
groups. This affects both Whole Groups to Import and Text List
selections.
Select the configuration groups to import from the XML configuration
record. This option imports all instances of each selected group.
Enter the string to import specific instances of a group. The textual format
of this string is: <g>:<i>;<g>:<i>;...
Each group name <g> is followed by a colon and the instance value <i>
and each <g>:<i> value is separated by a semi-colon. If a group has no
instance then only the group name <g> should be specified.

Table 12-8 Failover Settings

Description
Select Enabled or Disabled to enable or disable the Failover.
12: Advanced Settings
88