To View Or Configure Ddns Settings; Network 1 Interface Settings; Table 6-2 Ddns Settings; Table 6-3 Network Interface Settings - Lantronix PremierWave XC User Manual

Note: A valid account with DynDNS.com is necessary for this service to work.
Setting / Field
State
User Name
Password
Domain

To View or Configure DDNS Settings

Using Web Manager

To configure DDNS settings, click Network in the menu bar and select DDNS.
Using CLI

To configure DDNS command level: enable -> config -> ddns
Using XML

Include in your file: <configgroup name="ddns">

Network 1 Interface Settings

Table 6-3 shows the network interface settings for Ethernet that can be configured. These
settings apply to the Ethernet (eth0) only.
Network Interface
Settings
BOOTP Client
PremierWave XC User Guide

Table 6-2 DDNS Settings

Description
Select Enabled or Disabled.
Enter or modify DDNS account user name.
Enter or modify DDNS account password.
Enter or modify DDNS account host domain.

Table 6-3 Network Interface Settings

Description
Select On or Off. At boot up, after the physical link is up, the PremierWave XC
will attempt to obtain IP settings from a BOOTP server.
Note: Overrides the configured IP address/mask, gateway, hostname, and
domain. When DHCP is On, the system automatically uses DHCP, regardless of
whether BOOTP is On. Changing this value requires you to reboot the device.
6: Network Settings
35