Query Port; To Configure Query Port Settings; Table 11-9 Query Port Settings - Lantronix PremierWave XC User Manual

Using the CLI

To enter the command level: enable -> config -> snmp
Using XML

Include in your file:

Query Port

The query port (UDP port 0x77FE) is used for the automatic discovery of the device by the
DeviceInstaller utility. Only 0x77FE discover messages from DeviceInstaller are supported. For
more information on DeviceInstaller, see
Query Port Settings
State

To Configure Query Port Settings

Using Web Manager

To view Query Port settings or to switch the Query Port Server on or off, click Query Port in
the menu bar.
Using the CLI

To enter the Query Port command level: enable -> config -> query port
Using XML

Include in your file:
<configgroup name="query port">
and
<configitem name="state">
PremierWave XC User Guide
<configgroup name="snmp xc">
Chapter 4: Using

Table 11-9 Query Port Settings

Description
Select Enabled or Disabled to enable or disable listening and responding to
query port messages.
11: Maintenance and Diagnostics Settings
DeviceInstaller.
76