To Ping A Remote Host; Traceroute; To Perform A Traceroute; Table 11-11 Traceroute Settings - Lantronix PremierWave XC User Manual

Diagnostics: Ping Settings
Timeout

To Ping a Remote Host

Using Web Manager

To ping a Remote Host, click Diagnostics in the menu bar and select Ping.
Using the CLI

To enter the command level: enable
Using XML

Not applicable.

Traceroute

Here you can trace a packet from the PremierWave XC to an Internet host, showing how many
hops the packet requires to reach the host and how long each hop takes. If you visit a web site
whose pages appear slowly, you can use traceroute to determine where the longest delays are
occurring.
Diagnostics:
Traceroute Settings
Host
Protocol

To Perform a Traceroute

Using Web Manager

To perform a Traceroute, click Diagnostics in the menu bar and select Traceroute.
Using the CLI

To enter the command level: enable
PremierWave XC User Guide
Description
Enter the time, in seconds, for the PremierWave XC to wait for a
response from the host before timing out. The default is 5 seconds.

Table 11-11 Traceroute Settings

Description
Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave XC when issuing the traceroute command.
Select the traceroute protocol:

TCP

ICMP

UDP
11: Maintenance and Diagnostics Settings
78