Lantronix PremierWave XC User Manual page 33

Web Manager
Page
Network
Protocol Stack
Query Port
Relay Output
RSS
SSH
SSL
Syslog
System
Terminal
Tunnel
XML
Note: There may be times when you must reboot the PremierWave XC for the new
configuration settings to take effect. The chapters that follow indicate when a change
requires a reboot.
PremierWave XC User Guide
Description
Shows status and lets you configure the network interface, WAN connection,
and DDNS.
Lets you perform lower level network stack-specific activities.
Lets you change configuration settings for the query port.
Lets you change the Initiation State, and customise the Relay output SMS
command to open, close Relay Output.
Lets you change current Really Simple Syndication (RSS) settings.
Lets you change the configuration settings for SSH server host keys, SSH
server authorized users, SSH client known hosts, and SSH client users.
Lets you upload an existing certificate or create a new self-signed certificate.
Lets you specify the severity of events to log and the server and ports to which
the syslog should be sent.
Lets you reboot device, restore factory defaults, upload new firmware, and
change the device long and short names.
Lets you change current settings for a terminal.
Lets you change the current configuration settings for a tunnel.
Lets you export XML configuration and status records, and import XML
configuration records.
5: Configuration Using Web Manager
See
Page
34
73
76
90
66
85
67
62
81
58
49
85
33