To Configure Smtp Network Stack Settings; To Configure Snmp Network Stack Settings; Table 11-7 Smtp Network Stack Settings; Table 11-8 Snmp Network Stack Settings - Lantronix PremierWave XC User Manual

Protocol Stack SMTP
Settings
Relay Address
Relay Port

To Configure SMTP Network Stack Settings

Using Web Manager

To configure SMTP protocol settings, click Protocol Stack in the menu bar and select SMTP.
Using the CLI

To enter the command level: enable -> config -> smtp
Using XML

Include in your file: <configgroup name="smtp">
Note: Configuration must be correct in order for the device to successfully send SNMP
Trap.
Protocol Stack
SNMP Settings
Remote
Hostname
Community
sysLocation

To Configure SNMP Network Stack Settings

Using Web Manager

To configure SNMP protocol settings, click Protocol Stack in the menu bar and select
SNMP.
PremierWave XC User Guide

Table 11-7 SMTP Network Stack Settings

Description
Address of all outbound messages through a mail server. Can contain either
a hostname or an IP address.
Port utilized for the delivery of outbound email messages.

Table 11-8 SNMP Network Stack Settings

Description
Enter the Remote Hostname location for the send location of the SNMP trap.
Enter the Community name of the SNMP trap.
Enter the location of the device to send the SNMP trap.
11: Maintenance and Diagnostics Settings
75