To Transfer Or Modify Filesystem Files; Protocol Stack Settings; To Configure Ip Network Stack Settings; Table 11-4 Ip Network Stack Settings - Lantronix PremierWave XC User Manual

To Transfer or Modify Filesystem Files

Using Web Manager

To create a new file or directory, upload an existing file, copy or move a file, click Filesystem
in the menu bar and select Browse.
Using the CLI

To enter the Filesystem command level:
Using XML

Not applicable.

Protocol Stack Settings

There are various low level IP network stack specific items that are available for configuration.
This includes settings related to IP, ICMP, ARP, SMTP and SNMP which are described in the
sections below.
Protocol Stack
IP Settings
IP Time to Live
Multicast Time to Live

To Configure IP Network Stack Settings

Using Web Manager

To configure IP protocol settings, click Proto col Stack in the menu bar and select IP.
Using the CLI

To enter the command level: enable -> config -> ip
Using XML

Include in your file: <configgroup name="ip">
PremierWave XC User Guide
enable -> filesystem

Table 11-4 IP Network Stack Settings

Description
This value typically fills the Time To Live in the IP header. SNMP refers to this
value as "ipDefaultTTL".
Enter the number of hops to be transmitted before the packet is discarded.
This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
11: Maintenance and Diagnostics Settings
73