Specifications - Icom IC-F29DR Service Manual

SECTION 1.
M GENERAL
• Frequency range:
• Number of conventional channels:
• Type of emission:
• Antenna impedance:
• Operating temperature range:
• Power supply:
• Current drain (approximately):
• Dimensions :
(projections not included)
• Weight (approximately):
M TRANSMITTER
• Output power:
• Modulation:
• Maximum permissible deviation:
• Frequency stability:
• Spurious emissions:
• Adjacent channel power:
• Audio harmonic distortion:
• FSK Error:
• Residual modulation:
(with CCITT FILTER)
• Limitting characteristic of modulation: 60–100% of maximum deviation
• Input impedance (microphone):

SPECIFICATIONS

446.006250 MHz to 446.093750 MHz (PMR446)
446.103125 MHz to 446.196875 MHz (dPMR446)
16 channels
Analog (Narrow) 8K50F3E (12.5 kHz)
Digital 4K00F1E, D (6.25 kHz)
50  (Nominal)
–25˚C to +55˚C
Only specified Icom's battery packs (7.5 V DC, negative ground)
Receiving 0.11 A (Digital mode, stand-by)
0.4 A (maximum audio, internal speaker)
Transmitting 0.5 A (at 0.5 W ERP)
52.2(W) × 186.1(H) × 24.5(D) mm (with the BP-279)
52.2(W) × 186.1(H) × 30.3(D) mm (with the BP-280)
147 g (without belt clip and battery pack)
236 g (with the MB-133 and the BP-279)
270 g (with the MB-133 and the BP-280)
0.5 W ERP
Variable reactance frequency modulation
Narrow ±2.5 kHz
±1.0 ppm
0.25 µW (1 GHz), 1.00 µW (1 GHz)
Analog (Narrow) 60 dB minimum, 68 dB typical
Digital 60 dB minimum, 65 dB typical
Analog (Narrow) 1.5% typical (at AF 1 kHz 40% deviation)
Digital 5% maximum
Analog (Narrow) 40 dB minimum, 48 dB typical
2.2 k
1-1