Disassembly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
Figure 2
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
HDD Assembly
Chapter 4 of the User's Manual) when setting up a new hard disk.
Removal
Hard Disk Upgrade Process
a. Locate the HDD bay
cover and remove the
1. Turn off the computer, and remove the battery
screw(s).
2. Locate the hard disk bay cover and remove screws
New HDD's are blank. Before you begin make sure:
You have backed up any data you want to keep from your old HDD.
• 2 Screws
You have all the CD-ROMs and FDDs required to install your operating system and programs.
If you have access to the internet, download the latest application and hardware driver updates for the operating system you plan
to install. Copy these to a removable medium.
2 - 6 Removing the Hard Disk Drive
(page 2 -
a.
M770CU/M775CU
1
2
HDD System Warning
5).
&
.
1
2
W760CU/W765CU
1
2
Need help?
Do you have a question about the M770CU and is the answer not in the manual?
Questions and answers