Removing The Hard Disk Drive - EUROCOM M660N Service Manual

Disassembly

Removing the Hard Disk Drive

The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" IDE hard disk drives
Figure 2
with a height of 9.5mm (h). Follow your operating system's installation instructions, and install all necessary drivers and
HDD Assembly
utilities (as outlined in Chapter 4 of the User's Manual) when setting up a new hard disk.
Removal
Hard Disk Upgrade Process
a. Locate the HDD bay cov-
er and remove the
1. Turn off the computer, and remove the battery
screws.
2. Locate the hard disk bay cover and remove the screws (
b. Remove the bay cover.
3. Remove the bay cover
a.
New HDD's are blank. Before you begin make sure:
4. HDD Bay Cover
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your operating system and programs.
• 3 Screw
If you have access to the internet, download the latest application and hardware driver updates for the operating system you plan
to install. Copy these to a removable medium.
2 - 6 Removing the Hard Disk Drive
All manuals and user guides at all-guides.com
l
.
6
4
1
3
2
HDD System Warning
(page 2 - 5).
-
).
1 3
b.
4