Removing The Hard Disk Drive - EUROCOM M620NC Service Manual

Disassembly

Removing the Hard Disk Drive

Figure 2
HDD Assembly
The hard disk drive can be taken out to accommodate other 2.5" or 1.8" Parallel (PATA) hard disks with a height of
Removal
9.5mm (h) (see
a. Remove the screws.
1. Turn off the computer, and turn it over and remove the battery
b. Remove the cover.
2. Locate the hard disk bay cover and remove the screws from points
c. Remove the foam top
cover for 1.8" hard disks.
3. Remove the hard disk bay cover
4. HDD Bay Cover
5. Top Sponge Module
for 1.8" Hard Disks
• 3 Screws
2 - 6 Removing the Hard Disk Drive
All manuals and user guides at all-guides.com
"Storage" on page 1 - 2).
a.
1
4 (and foam top cover
b.
4
(page 2 - 5).
-
1 3
2
3
5 for 1.8" hard disks).
c.
5
.
b.
4