1. Manuals
  2. Brands
  3. EUROCOM Manuals
  4. Laptop
  5. M120 VOYAGE
  6. User manual

EUROCOM M120 VOYAGE User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M120 VOYAGE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EUROCOM M120 VOYAGE

Summary of Contents for EUROCOM M120 VOYAGE

  • Page 3: Trademarks

    Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Infor- mation contained herein is for reference only and does not constitute a commitment on the part of the man- ufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.

  • Page 4: Fcc Statement

    Preface FCC Statement (Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 5: Important Safety Instructions

    Preface IMPORTANT SAFETY INSTRUCTIONS When using any electrical equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 6: Instructions For Care And Operation

    Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
  • Page 7 Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work.

  • Page 8: Power Safety

    Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer. • Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are unsure of your local power specifi- Power Safety cations, consult your service representative or local power company.

  • Page 9: Battery Precautions

    Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the com- puter. • Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode. • Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel.

  • Page 10: Cleaning

    Preface Cleaning Do not apply cleaner directly to the computer, use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.

  • Page 11: Travel Considerations

    Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: Check that the battery pack and any spares are fully charged. Power off the computer and peripherals. Close the display panel and make sure it’s latched.
  • Page 12 Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshoot- ing, keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common.
  • Page 13 Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.
  • Page 14 Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. • Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly.

  • Page 15: Table Of Contents

    Preface Contents Notice ................I PC Camera ............. 1-8 Trademarks ............I LCD Panel ............1-8 FCC Statement ...........II Stereo Speakers ..........1-8 LED Power Indicators ........1-8 Instructions for Care and Operation ....IV Power Button ..........1-9 Power Safety ............. VI Close Cover Switch ........
  • Page 16 Preface External Monitor (VGA) Port ......1-15 PC Card Slot ............2-12 DC-In Jack ............1-15 Inserting and Removing PC Cards ....2-12 Bottom View ............1-16 The Keyboard ............2-13 Battery ............1-17 Function Keys ..........2-13 Hard Disk Drive ...........1-17 Numeric Keypad .......... 2-14 Wireless LAN (Network) &...
  • Page 17 Preface Switching/Enabling Displays (Keyboard) ..3-11 (WinXP) ............3-27 Switching/Enabling Displays (Driver) .....3-12 (Win2000) ............ 3-27 Multi-Monitor Modes ........3-13 AMCAP ............3-29 Intel(R) Dual Display Clone ......3-13 Set Capture File ........... 3-29 Extended Desktop ........3-13 Eliminating Screen Flicker ......3-30 To Enable Dual Display Clone Mode: ..3-14 Intel PRO/Wireless Mini PCI WLAN Module ..
  • Page 18 Preface Windows 2000 Professional ........4-7 WLAN Application (WinXP) ...... 4-17 Chipset (Win2000) .........4-7 For 802.11b (Intel 2100) ......4-17 Video (Win2000) ..........4-7 For 802.11b/g (Intel 2200BG) ....4-17 Audio (Win2000) ...........4-8 For both modules ........4-17 LAN (Win2000) ..........4-8 802.11b WLAN Driver (WinXP) ....4-18 Modem (Win2000) .........4-8 802.11b/g WLAN Driver (WinXP) .....
  • Page 19 Preface Upgrading The Computer ...6-1 Overview ..............6-1 When Not to Upgrade .........6-2 Removing the Battery ..........6-3 Upgrading the Hard Disk Drive .......6-4 Upgrading the System Memory (RAM) ....6-7 Upgrading the Optical Device ........6-10 Upgrading the Processor ........6-12 Troubleshooting ......7-1 Overview ..............7-1 Basic Hints and Tips ..........7-2 Backup and General Maintenance ......7-3 Viruses ..............7-4...
  • Page 20 Preface XVIII...

  • Page 21: Introduction

    Introduction Chapter 1: Introduction Overview Notes Check the light colored This manual refers to the hardware and essential software required to run your boxes with the mark notebook computer. Depending on how your system is configured, some or all above to find detailed of the features described may already be set up.

  • Page 22: Warning Boxes

    Introduction Warning Boxes No matter what your level please pay careful attention to the warning and safe- ty information indicated by the symbol. Also please note the safety and handling instructions as indicated in the Preface . Not Included Operating Systems (e.g. Windows 2000 Professional, Windows XP etc.) have their own manuals, as do applications (e.g.

  • Page 23: Quick Start Guide

    Introduction Quick Start Guide This guide assumes that you are already familiar with computers and can tell Peripheral Devices at a glance what and where all the key components are. If you are not that com- fortable with this type of device, then please refer to the following pages, Please note that pe- which give an overview of the system.

  • Page 24: System Map

    Introduction System Map Your computer has a lot of built-in features. Most of these are enabled by your operating system. Further explanations of the various subsystems are covered Design Differences in the chapter or pages indicated. This manual refers to the two notebook de- Getting to Know Your Computer signs pictured.

  • Page 25: Gloss Style Top Covers

    Introduction Gloss Style Top Covers Note the following guidelines for care and attention of the gloss style top cov- er incorporated within the design styles of this notebook model. • Remove the protective cover slowly and carefully. Do not forcibly tear off the protective cover as this may damage the surface of the top cover.

  • Page 26: Top View

    Introduction Top View Figure 1 - 2 Top View with LCD Panel Closed LCD Latches LED Power Indicators To open the LCD display: Place the computer on a stable surface. Move the LCD latches in the direction of the arrows to release the top cover.

  • Page 27: Top View With Lcd Panel Open

    Introduction Top View with LCD Panel Open Figure 1 - 3 Top View with LCD Panel Open Optional PC Camera LCD Panel 2 * Built-In Speakers LED Power Indicators Power Button Design II Close Cover Switch Keyboard TouchPad and Buttons Design Differences Built-In Microphone 10.

  • Page 28: Pc Camera

    Introduction PC Camera If you have purchased the optional PC Camera, make sure you install the soft- ware application (see “PC Camera” on page 3 - 26). LCD Panel The computer comes with a TFT (Liquid Crystal Display) screen. See “LCD”...

  • Page 29: Power Button

    Introduction Power Button Press this button to turn your computer on or off (see “Turning on the Computer” on page 2 - 4). This button may also be configured to be used as a suspend/resume key in the power management control panel of your operating system (see “Configuring the Power Button”...

  • Page 30: Keyboard

    Introduction Keyboard The computer has a “Win Key” keyboard including a numeric keypad. It has the same features as a full-sized desktop keyboard and can easily be replaced with a different language keyboard should you desire. TouchPad & Buttons The pointing device features a sensitive glide pad for precise movements. It functions the same way as a two-button mouse.

  • Page 31: Front View

    Introduction Front View Figure 1 - 4 Front View LCD Latches Microphone-In Jack Headphone-Out Jack Infrared Transceiver Microphone-In Jack Record on your notebook computer with an external microphone. Headphone-Out Jack Headphones or speakers may be connected through this jack. Note: Set your system’s volume to a reduced level before connecting to this jack.

  • Page 32: Left Side View

    Introduction Left Side View Figure 1 - 5 Left Side View Security Lock Slot Vent RJ-45 LAN Jack RJ-11 Phone Jack USB 2.0/1.1 Ports PC Card Slot Overheating PC Card Slot Eject Button To prevent your computer from overheating make sure nothing blocks the vent/fan outlet while the computer is in use.

  • Page 33: Rj-45 Lan Jack

    Introduction RJ-45 LAN Jack This port supports LAN (Network) functions. Note: Broadband (e.g. ADSL) modems usually connect to the LAN port. RJ-11 Phone Jack This port connects to the built-in modem. You may plug the telephone line di- rectly into this RJ-11 telephone connection. Note: Broadband (e.g.

  • Page 34: Right Side View

    Introduction Right Side View Figure 1 - 6 Right Side View Optical Device Bay External Monitor (VGA) Port DC-In Jack Optical Device Bay The optical device bay will contain a 5.25" (12.7mm height) CD/DVD type device. The actual device will depend on your purchase option (see “Storage”...

  • Page 35: External Monitor (Vga) Port

    Introduction External Monitor (VGA) Port Connect an external VGA monitor (CRT) to this port to allow dual video or simultaneous display on the LCD and external VGA monitor (see “Display Devices” on page 3 - 11). DC-In Jack Plug the supplied AC adapter into this jack to power your notebook. Right Side View 1 - 15...

  • Page 36: Bottom View

    Introduction Bottom View Figure 1 - 7 Bottom View Vent/Fan Outlet Battery Memory (RAM) Socket Cover Hard Disk Cover WLAN Module Cover CPU Cover The CPU is not a user serviceable part. Open- ing this compartment, or Overheating accessing the CPU in To prevent your computer from overheating make sure nothing blocks the vent/fan any way, may violate outlet while the computer is in use.

  • Page 37: Battery

    Introduction Battery “Battery Information” on page 3 - 24 for instructions on battery use and care. Hard Disk Drive The internal hard disk drive is used to store your data. See information on page 6 - 4 for information on upgrading/replacing your hard disk drive. Drive Warning Don’t try to remove the hard disk (HDD) while the system is on.

  • Page 38: Wireless Lan (Network) & Bluetooth Modules

    Introduction Wireless LAN (Network) & Bluetooth Modules Your notebook computer will have either an Intel PRO/Wireless 2100 (802.11b) OR 2200BG (802.11b/g) Mini PCI Wireless LAN module, and Wireless Device may have an optional Bluetooth module. The antenna and other components Operation Aboard are not externally visible (check with your service representative).

  • Page 39: Using The Computer

    Using The Computer Chapter 2: Using The Computer Overview To learn more about using your computer, please read this chapter. This chapter includes: • The Power Sources • Turning on the Computer • The LED Indicators • The Hard Disk Drive •...

  • Page 40: The Power Sources

    Using The Computer The Power Sources The computer can be powered by either an AC adapter or a battery pack. Power Button as Standby or Hibernate AC Adapter Button Use only the AC adapter that comes with your computer. The wrong type of If you are using a fully AC adapter will damage the computer and its components.

  • Page 41: Battery

    Using The Computer Battery The battery allows you to use your notebook computer while you are on the road or an electrical outlet is unavailable. Battery life varies depending on the Battery Removal applications and the configuration you're using. To increase battery life, let We recommend that the battery discharge completely before recharging (see “How do I com-...

  • Page 42: Turning On The Computer

    Using The Computer Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the power button on the front panel. Shutdown Note that you should When the computer is on, you can use the power button as a Standby/Hiber- always shut your com- nate/Shutdown hot-key button when it is pressed for less than 4 seconds puter down by choos-...

  • Page 43: Led Indicators

    Using The Computer LED Indicators There are two sets of LED indicators (LED Power Indicators and LED Sta- Communication tus Indicators) on your computer that will display helpful information about Conflict the current status of the computer. The LED Power Indicators are also visi- ble when the top of your computer is closed.

  • Page 44: Led Power Indicators

    Using The Computer LED Power Indicators Table 2 - 2 Icon Color Description LED Power Green The computer is on Indicators Blinking Green The computer is in standby mode Orange The battery is being charged Green The battery is fully charged Blinking Orange The battery has reached critically low power status 2 - 6 LED Indicators...

  • Page 45: Hard Disk Drive

    Using The Computer Hard Disk Drive The hard disk drive is used to store your data in the notebook computer. The hard disk can be taken out to accommodate other 2.5" IDE hard disk drives Power Safety with a height of 9.5 mm. Before attempting to access any of the inter- The hard disk...

  • Page 46: Optical Device

    Using The Computer Optical Device The optical device bay will contain a 5.25" CD-ROM/DVD type optical de- vice. The actual device type will depend on the option you purchased (see Sound Volume Adjustment “Storage” on page B - 3). The CD Device is usually labeled “Drive D:”, and may be used as a boot device if properly set in the BIOS (see “Boot Menu”...

  • Page 47: Handling Cds Or Dvds

    Using The Computer Handling CDs or DVDs Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CD- CD Emergency Eject ROMs/DVD-ROMs can be accessed. If you need to manually Remember to: eject a CD (e.g.

  • Page 48: Dvd Regional Codes

    Using The Computer DVD Regional Codes DVD region detection is device dependent, not OS-dependent. You can select your module’s region code 5 times. The fifth selection is permanent. This can- not be altered even if you change your operating system or you use the module in another computer.

  • Page 49: Changing Dvd Regional Codes

    Using The Computer Changing DVD Regional Codes Go to the Control Panel in WindowsXP/Windows 2000 and double-click Sys- tem > Hardware (tab), click Device Manager, then click the + next to DVD/ CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties menu, and select the DVD Region (tab) to bring up the control panel as seen in “DVD Regional Codes (Windows XP)”...

  • Page 50: Pc Card Slot

    Using The Computer PC Card Slot The computer is equipped with a PCMCIA 3.3V/5V slot for one type II PC Card. Make sure you install the driver for the PC Card (see “What to Install” Conserving Battery Power on page 4 - To conserve battery Inserting and Removing PC Cards power remove any un-...

  • Page 51: The Keyboard

    Using The Computer The Keyboard Function Keys Other Keyboards On the bottom-left of the keyboard is the Fn key or Function key. The Fn key If your keyboard is allows you to change operational features instantly. To use the functions press damaged or you just want make...

  • Page 52: Numeric Keypad

    Using The Computer Numeric Keypad The keyboard has an embedded numerical keypad for easy numeric data input. Activate the Number Lock feature by pressing the Fn and Num Lk key com- Special Characters bination. You may check if Number Lock is enabled or not by looking at the Some software appli- LED status indicators (see “LED Indicators”...

  • Page 53: Touchpad And Buttons/Mouse

    Using The Computer TouchPad and Buttons/Mouse The TouchPad is a device for pointing (controlling input positioning) on the computer’s display screen by sensing finger movement, and downward pres- Mouse Driver sure. It is an alternative to the mouse; however, you can also add a mouse to If you are using an ex- your computer through one of the USB ports.

  • Page 54: Configuring The Infrared Transceiver

    Using The Computer Configuring the Infrared Transceiver To configure the computer’s settings for Fast Infrared (FIR) communication follow these steps: Infrared Communication Click Start, point to Settings (or just click Start and click Control Panel) The infrared transceiv- and click Control Panel. er operates on a “Line Double-click Wireless Link (in the Printers and Other Hardware of Sight”.

  • Page 55: Adding A Printer

    Using The Computer Adding a Printer The most commonly used peripheral is a printer. The following conventions will help you to add a printer, however it is always best to refer to the printer manual for specific instructions and configuration options. USB Printer Most new printers have a USB interface connection.

  • Page 56: Parallel Printer

    Using The Computer Parallel Printer This is still a very common type of printer. A Parallel to USB converter may be purchased at most computer stores. Install Instructions: Set up the printer according to its instructions (unpacking, paper tray, toner/ ink cartridge etc.).

  • Page 57: Advanced Controls

    Advanced Controls Chapter 3: Advanced Controls Overview This chapter covers: Drivers • Advanced Video Controls • Power and Battery Management Features You are unable to use • The PC Camera Module (optional) most advanced con- trols until the neces- • Intel PRO/Wireless LAN 2100 (802.11b) OR 2200BG (802.11b/g) Mini sary drivers PCI Module...

  • Page 58: Advanced Video Controls

    Advanced Controls Advanced Video Controls This section is about making adjustments for the LCD, and switching display devices. Protecting the LCD Do not allow any for- Opening the LCD eign objects (i.e. paper As you open the lid, adjust it so you can look at the screen straight on, without or plastic) to get be- tween the lid/LCD and any glare.

  • Page 59: Dynamic Video Memory Technology

    Advanced Controls Dynamic Video Memory Technology ® Intel DVMT automatically and dynamically allocates as much (up to 64MB) system memory (RAM) as needed to the video system (the video driver must Table 3 - 1 be installed - see “What to Install” on page 4 - 1).

  • Page 60: Video Driver Controls

    Advanced Controls Video Driver Controls The video interface lets you change the screen resolution and color output to whatever is most comfortable/efficient for you. This is a matter of hardware, Screen Resolution/ Screen Area Note video memory and the driver for your operating system. The driver interface shows the available options (see “Display”...
  • Page 61 Advanced Controls Table 3 - 1 Feature Design I Design II Graphic Driver Screen Type 12.1" XGA TFT LCD 4:3 Panel 12.1" WXGA TFT LCD 16:9 Panel Differences Default 1024 * 768 1280 * 800 Resolution Taskbar Icon Control Panel Icon Screen Examples...

  • Page 62: Making Adjustments For The Display

    Advanced Controls Making Adjustments for the Display The higher the resolution you set the LCD for, the more information the LCD can display on screen. To change the LCD’s resolution and color depth go to the Display Properties control panel: Click Start, point to Settings (or just click Control Panel) and click Control Panel (if you are in Category View choose Appearance and Themes).

  • Page 63: Display Properties

    Advanced Controls Display Properties Figure 3 - 3 Display Properties Intel(R) Extreme Graphics Controller Properties You can click Graph- ics Properties (but- ton) in the Intel(R) Extreme Graphics tab (in the Advanced op- tions) to access the screens in Figure 3 - 5 When the Display Properties control panel is open, click the Advanced on page 3 - (button) to bring up the options tabs.

  • Page 64: Intel Video Driver Controls

    Advanced Controls Intel Video Driver Controls After installing the video driver there will be an additional control panel en- titled Intel(R) Extreme Graphics. To get to the control panel to make chang- Taskbar es to the Graphics Properties, do the following: You can also access the control panel from Click Start, point to Settings (or just click Control Panel) and click Control...
  • Page 65 Advanced Controls You may make changes to the Devices, Color, Schemes and Hot Keys by clicking the appropriate tab and adjusting the setting, then by clicking OK. The Information and Open GL tabs display useful information about the graphics properties of your computer, and the Support item in the Information tab has weblinks to the latest information (drivers, troubleshooting issues etc.) on the Intel Website.

  • Page 66: Schemes

    Advanced Controls Schemes Use Schemes to configure quick settings for applications that require specific resolution and color settings in order to run properly e.g. games, multimedia Application.exe programs. To set the schemes: You will need to locate the actual application Go to the Intel(R) 82852/82855 GM/GME Graphics Controller Properties executable (.exe) file, control panel (see...

  • Page 67: Display Devices

    Advanced Controls Display Devices Figure 3 - 6 Right Side View Besides the built-in LCD, you can also use an external monitor (CRT) as your display device. A monitor connects to the external monitor (VGA) port Using the Driver to Switch Displays If you only use the key- board toggle to switch...

  • Page 68: Switching/Enabling Displays (Driver)

    Advanced Controls Switching/Enabling Displays (Driver) With the video driver installed (see pages 4 - 7 & 14), you can use the built-in controls to switch between the displays as follows: Vertical Refresh Rate Plug the monitor into the appropriate port. The vertical refresh rate of your monitor is impor- Go to the Intel(R) 82852/82855 GM/GME Graphics Controller Properties...

  • Page 69: Multi-Monitor Modes

    Advanced Controls Multi-Monitor Modes In addition to the single LCD display mode you have the following Multi- Monitor modes available when the external monitor is attached. Function Key Combinations Intel(R) Dual Display Clone You can use the Fn + This mode will drive multiple displays with the same content. Use this feature F7 key combination to to display the screen through a projector for a presentation.

  • Page 70: To Enable Dual Display Clone Mode

    Advanced Controls To Enable Dual Display Clone Mode: Plug the monitor into the appropriate port. Go to the Intel(R) 82852/82855 GM/GME Graphics Controller Properties control panel (see “Intel Video Driver Controls” on page 3 - 8) and select Devices (tab). Click the Intel(R) Dual Display Clone icon in the devices tab (Note: this option is only available when you have attached the monitor).

  • Page 71: To Enable Extended Desktop Mode

    Advanced Controls To Enable Extended Desktop Mode: Plug the monitor into the appropriate port. Go to the Intel(R) 82852/82855 GM/GME Graphics Controller Properties Device Settings control panel (see “Intel Video Driver Controls” on page 3 - 8) and select Extended Desktop Devices (tab).

  • Page 72: To Enable Extended Desktop (Display Properties)

    Advanced Controls To Enable Extended Desktop (Display Properties) Plug the monitor into the appropriate port. Click Start, point to Settings (or just click Control Panel) and click Control Extended Desktop Panel (if you are in Category View choose Appearance and Themes). Mode Double-click Display (icon).

  • Page 73: Power Management Features

    Advanced Controls Power Management Features To conserve power, especially when using the battery, your notebook comput- er uses the ACPI power management system. Power management conserves OS Note power by controlling individual components of the computer (the monitor and Power management hard disk drive) or the whole system.

  • Page 74: Enabling Power Options

    Advanced Controls Enabling Power Options Power Options are enabled through the control panel in your Windows sys- tem (Power Options). With other operating systems you may have power management available, so check your documentation. Figure 3 - 11 Power Options Control Panel You may conserve power through individual components or throughout the whole system.

  • Page 75: Power Schemes

    Advanced Controls Power Schemes You can set your computer to conserve power through individual components by means of Power Schemes. You can also adjust the settings for each Resuming Operation scheme to set the monitor to turn off after a specified time, and the computer's The system can re- hard disk motor to turn off if the hard disk drive has not been accessed for a sume from Monitor or...
  • Page 76 Advanced Controls Each Windows Power Scheme will also adjust the processor performance of your machine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Set the Power Scheme which is most appropriate for the conditions and the applications you are using (e.g.

  • Page 77: Conserving Power (System)

    Advanced Controls Conserving Power (System) With this function you can stop the notebook’s operation and restart where you left off. This system features Standby and Hibernate sleep mode levels (Hibernate mode will need to be enabled by clicking the option in the Hiber- nate tab in the Power Options control panel - Figure 3 - 13 on page 3 - 22).

  • Page 78: Standby

    Advanced Controls Standby Standby saves the least amount of power, but takes the shortest time to return to full operation. During Standby the hard disk is turned off, and the CPU is System Resume made to idle at its slowest speed. All open applications are retained in memo- system ry.

  • Page 79: Configuring The Power Button

    Advanced Controls Configuring the Power Button The power button may be set to send the computer in to either Standby or Hi- bernate mode (Figure 3 - 13). In Standby mode, the LED will flash Close Cover green. In Hibernate mode the LED will be orange if AC Adapter powered, or If you have set your will be off if battery powered.

  • Page 80: Battery Information

    Advanced Controls Battery Information Please follow these simple guidelines to get the best use out of your battery. Caution New Battery Danger of explosion if Always completely discharge, then fully charge, a new battery before using it battery is incorrectly (see “Battery FAQ”...

  • Page 81: Battery Faq

    Advanced Controls Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days. Conserving Battery We recommend that you do not remove the battery yourself. If you need to re- Power move the battery for any reason see “Removing the Battery”...

  • Page 82: Pc Camera

    Advanced Controls PC Camera A PC Camera module is provided as an optional module for this computer model. You will have the appropriate software CD provided for your module, Make sure you install ALL the drivers in the order indicated in Table 4 - 1 - Install Procedure on page 4 - 6.

  • Page 83: Pc Camera Audio Setup

    Advanced Controls PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Taking Still Pictures (WinXP) You may take still pic- tures in the Windows Go to the Start menu and point to Settings (or just click Control Panel) and XP operating system click Control Panel, then double-click the Sounds &...
  • Page 84 Advanced Controls Figure 3 - 16 Audio Setup (Windows XP) 3 - 28 PC Camera...

  • Page 85: Amcap

    Advanced Controls AMCAP AMCAP is a video viewer useful for general purpose video viewing and test- ing, and can capture video files to .avi format. Pre-Allocating File Space Run the AMCAP program from the Start > Programs/All Programs > CMM You may pre-allocate PC Camera menu (it is recommended that you set the capture file before the file size for the cap-...

  • Page 86: Eliminating Screen Flicker

    Advanced Controls Eliminating Screen Flicker If you find that the video screen in the AMCAP program is flickering, you can try to adjust the option from the Video Capture Filter options. Run the AMCAP program from the Start > Programs/All Programs > CMM PC Camera menu.

  • Page 87: Intel Pro/Wireless Mini Pci Wlan Module

    Advanced Controls Intel PRO/Wireless Mini PCI WLAN Module Either an Intel PRO/Wireless 2100 (802.11b) OR 2200BG (802.11b/g) Mini Wireless Device PCI WLAN module is supplied as a standard feature for this computer model. Operation Aboard You will have the appropriate software CD provided for your module, de- Aircraft pending on your purchase option.

  • Page 88: Intel Pro/Wireless 2100 (802.11B)

    Advanced Controls To get help on the network settings you can view the User Guides from the Intel PRO CD-ROM. Bluetooth & WLAN Intel PRO/Wireless 2100 (802.11b) Modules You can view the User Guides by inserting the Intel PRO CD-ROM and click- Do not try to use the ing Wireless LAN Adapters (button) >...

  • Page 89: Bluetooth Module

    Advanced Controls Bluetooth Module A Bluetooth module is provided as an optional module for this computer Wireless Device model. You will have the appropriate software CD provided for your module, Operation Aboard if you have included the Bluetooth module in your purchase option. Aircraft Before installing the Bluetooth driver, make sure that the module is on (the The use of any porta-...

  • Page 90: Bluetooth Manual And Application Note

    Advanced Controls Bluetooth Manual and Application Note Configuration information for the Bluetooth module is contained in the Man- ual and Application note (in Adobe Acrobat .pdf format) on the Bluetooth CD-ROM. You may need to install the Acrobat Reader program first (click the Acrobat Reader item when you insert the Bluetooth CD-ROM and follow the on-screen instructions).

  • Page 91: Bluetooth Driver Audio Setup (Win2000)

    Advanced Controls Bluetooth Driver Audio Setup (Win2000) After installing the Bluetooth driver in Windows 2000 you may no longer hear any sound, nor see the Volume icon in the taskbar. If this is the case then fol- low this procedure: Go to the Sounds &...

  • Page 92: Bluetooth Control Panel Options

    Advanced Controls Bluetooth Control Panel Options You may need to change some control panel options after installing the Blue- tooth driver: Audio Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double-click the Sounds & Audio Devices/ Sounds &...

  • Page 93: Fax (Win2000)

    Advanced Controls FAX (Win2000) Go to the Start menu and point to Settings and click Control Panel, then double-click the Fax icon. Click Advanced Options (tab) and click the Open Fax Service Management Console (button). Click Devices in the Tree window on the left. The fax devices will be displayed in the right window, with the device with the highest priority displayed at the top.
  • Page 94 Advanced Controls 3 - 38...

  • Page 95: Drivers & Utilities

    Drivers & Utilities Chapter 4: Drivers & Utilities Overview What to Install This chapter deals with installing the drivers and The Device Drivers & Utilities + User’s Manual utilities essential to the operation or improvement CD-ROM contains the drivers and utilities neces- of some of the computer’s subsystems.
  • Page 96 Drivers & Utilities Windows XP Service Pack 1/1a Windows 2000 Service Pack 4 Make sure that you install Windows XP Service Make sure that your Windows 2000 version in- Pack 1/1a after installing all the drivers (if your cludes Service Pack 4 on the installation CD. Windows XP version includes Service Pack 1/1a you can skip this step).
  • Page 97 Drivers & Utilities Navigate (Browse..) to D: You will notice that many of the instructions for driver installation require you to “Navigate (Browse) to D:”. We assume that you will install all drivers and utilities from the built-in CD device and it is assigned to “Drive D:”.

  • Page 98: Authorized Driver Message

    Drivers & Utilities Driver Installation Authorized Driver Message If you receive a message telling you that the driver Insert the Device Drivers & Utilities + User’s you are installing is not authorized (Digital Signa- Manual CD-ROM and click the Install WinXP ture Not Found), just click Yes or Continue Any- Drivers OR Install Win2K Drivers button.

  • Page 99: Manual Driver Installation

    Drivers & Utilities Manual Driver Installation If you wish to bypass the automatic driver installa- tion application, you can run the manual installa- tion procedure from step 1 of the installation procedure for each driver listed in the following chapter. Figure 4 - 1 Drivers Installer Driver Installation 4 - 5...

  • Page 100: Updating/Reinstalling Individual Drivers

    Drivers & Utilities Updating/Reinstalling Individual Windows Windows Drivers Feature 2000 If you wish to update/reinstall individual drivers it Chipset page 4 - 7 page 4 - 14 may be necessary to uninstall the original driver. Video page 4 - 7 page 4 - 14 To do this go to the Control Panel in the Windows OS and double-click the Add/Remove Programs...

  • Page 101: Windows 2000 Professional

    Drivers & Utilities Windows 2000 Professional Chipset (Win2000) This section covers driver and utility installation in- structions for Windows 2000 Professional. 1. Click Start (menu) > Run ... 2. Navigate (Browse..) D:\Drivers\intel Chipset Utility\infinst_autol.exe and click 3. To continue click Next > Yes > Next. Windows 2000 Service Pack 4 4.

  • Page 102: Audio (Win2000)

    Drivers & Utilities Audio (Win2000) LAN (Win2000) 1. Click Start (menu) > Run ... 1. Click Start (menu) > Run ... 2. Navigate (Browse..) to 2. Navigate (Browse..) to D:\Drivers\Audio\Setup.exe and click OK. D:\Drivers\Lan\Setup.exe and click OK. 3. Click Next. 3.

  • Page 103: Pc Card/Pcmcia (Win2000)

    Drivers & Utilities PC Card/PCMCIA (Win2000) PC Camera (Win2000) 1. Click Start (menu) > Run ..The PC Camera module is an optional feature. If 2. Navigate (Browse..) to you have not included the PC Camera in your pur- D:\Drivers\PCMCIA\Setup.exe and click chase option, there is no need to install the driver.

  • Page 104: Wlan Application (Win2000)

    Drivers & Utilities WLAN Application (Win2000) Your computer may contain either an 802.11b (In- tel 2100) wireless module, or a 802.11b/g (Intel 2200BG) wireless module. You will be supplied Wireless Device Operation Aboard Aircraft with an appropriate CD containing drivers, applica- The use of any portable electronic transmission de- tions and a user guide for your module.

  • Page 105: Wlan Driver (Win2000)

    Drivers & Utilities 802.11b WLAN Driver (Win2000) You can now install the Administration Tools. 1. Make sure the module is powered on before 1. Insert the WLAN CD-ROM. (The program installing the driver. To toggle power to the should run automatically.) WLAN module use the key combination Fn + 2.

  • Page 106: B/G Wlan Driver (Win2000)

    Drivers & Utilities 802.11b/g WLAN Driver (Win2000) 10.You can configure the settings by going to the Intel (R) PROset for Wireless control panel 1. Make sure the module is powered on before (Start > Programs > Intel Network installing the driver. To toggle power to the Adapters).

  • Page 107: Bluetooth (Win2000)

    Drivers & Utilities Bluetooth (Win2000) 6. Click Finish > Yes to restart the computer. 7. You can configure the settings in the Bluetooth The Bluetooth module is an optional feature. If you Configuration control panel (Start menu and have not included the Bluetooth module in your point to Settings and click Control Panel then purchase option, do not install the driver.

  • Page 108: Windows Xp

    Drivers & Utilities Windows XP Chipset (WinXP) 1. Click Start (menu) > Run ... This section covers driver and utility installation in- 2. Navigate (Browse..) D:\Drivers\intel structions for Windows XP. Chipset Utility\infinst_autol.exe and click 3. To continue click Next > Yes > Next. 4.

  • Page 109: Audio (Winxp)

    Drivers & Utilities Audio (WinXP) LAN (WinXP) 1. Click Start (menu) > Run ... 1. Click Start (menu) > Run ... 2. Navigate (Browse..) to 2. Navigate (Browse..) to D:\Drivers\Audio\Setup.exe and click OK. D:\Drivers\Lan\Setup.exe and click OK. 3. Click Next. 3.

  • Page 110: Pc Card/Pcmcia (Winxp)

    Drivers & Utilities PC Card/PCMCIA (WinXP) PC Camera (WinXP) 1. Click Start (menu) > Run ..1. Insert the PC Camera CD-ROM into the 2. Navigate (Browse..) to drive. D:\Drivers\PCMCIA\Setup.exe and click 2. The program will run automatically. 3. Click Next. 3.

  • Page 111: Wlan Application (Winxp)

    Drivers & Utilities WLAN Application (WinXP) Your computer may contain either an 802.11b (In- tel 2100) wireless module, or a 802.11b/g (Intel 2200BG) wireless module. You will be supplied Wireless Device Operation Aboard Aircraft with an appropriate CD containing drivers, applica- The use of any portable electronic transmission de- tions and a user guide for your module.

  • Page 112: Wlan Driver (Winxp)

    Drivers & Utilities 802.11b WLAN Driver (WinXP) 8. Select “Search for the best driver in these locations.” and select ONLY “Include this 1. Make sure the module is powered on before location in the search:”. installing the driver. To toggle power to the 9.

  • Page 113: B/G Wlan Driver (Winxp)

    Drivers & Utilities 802.11b/g WLAN Driver (WinXP) 8. Select “Search for the best driver in these locations.” and select ONLY “Include this 1. Make sure the module is powered on before location in the search:”. installing the driver. To toggle power to the 9.

  • Page 114: Bluetooth (Winxp)

    Drivers & Utilities Bluetooth (WinXP) 6. Click Finish. 7. You can then begin to configure the settings in The Bluetooth module is an optional feature. If you the Bluetooth Configuration control panel. have not included the Bluetooth module in your Click Start (menu) and point to Settings (or purchase option, do not install the driver.
  • Page 115 Drivers & Utilities Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission de- vices aboard aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the computer aboard aircraft. When the computer first ‘Boots Up’ the module(s) will be OFF.
  • Page 116 Drivers & Utilities 4 - 22...

  • Page 117: Bios Utilities

    BIOS Utilities Chapter 5: BIOS Utilities Overview BIOS Settings Warning This chapter gives a brief introduction to the computer’s built-in software: Incorrect settings can cause your system to Diagnostics: the POST (Power-On Self Test) malfunction. To correct mistakes, return to Set- Configuration:the Setup &...

  • Page 118: The Power-On Self Test (Post)

    BIOS Utilities The Power-On Self Test (POST) Each time you turn on the computer, the system takes a few seconds to con- duct a POST, including a quick test of the on-board RAM (memory). Post Screen As the POST proceeds, the computer will tell you if there is anything wrong. 1.

  • Page 119: Failing The Post

    BIOS Utilities Failing the POST Errors can be detected during the POST. There are two categories, “fatal” and “non-fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system. Take the computer to your service representative or authorized service center as soon as possible.

  • Page 120: The Setup Program

    BIOS Utilities The Setup Program The Setup program tells the system how to configure itself and manage basic Setup Screens features and subsystems (e.g. port configuration). Instructions on how to Entering Setup navigate each screen are in the box at the bottom of To enter Setup, turn on the computer and press F2 during the POST or Logo screen.

  • Page 121: Main Menu

    BIOS Utilities Main Menu Figure 5 - 2 PhoenixBIOS Setup Utility Main Menu Main Main Advanced Security Boot Exit Item Specific Help System Time [2::01:05] System Date [05/07/2004] <Tab>, <Shift Tab>, or Primary Master [20004MB] <Enter> selects field. Secondary Master [CD-ROM System Memory: 640 KB...
  • Page 122 BIOS Utilities Primary Master (Main Menu) Pressing Enter under opens the sub-menu to show the configuration of the HDD that fits into the computer’s HDD bay. These items are configured au- Switching Hard Disks tomatically for you. Every time you install a different hard disk in Secondary Master (Main Menu) the computer, you can...

  • Page 123: Advanced Menu

    BIOS Utilities Advanced Menu Figure 5 - 3 PhoenixBIOS Setup Utility Advanced Menu Advanced Main Advanced Security Boot Exit Item Specific Help WinXP Installed O/S: Reset Configuration Data: [No] Select the operating Large Disk Access Mode: [DOS] system installed Local Bus IDE adapter: [Both] on your system which you will use most...
  • Page 124 BIOS Utilities Installed O/S: (Advanced Menu) This setting tells the computer what kind of operating system you’re using. Reset Configuration Data: (Advanced Menu) This item is set to No as default. You can change the setting to Yes if you have installed a new add-on which has reconfigured the system, resulting in such a serious system conflict that the operating system is unable to boot.
  • Page 125 BIOS Utilities Legacy USB Support: (Advanced Menu) Choose “Enabled” if you intend to use USB devices in systems which do not normally support USB functionality (e.g. DOS). The default setting is “En- abled” and does not need to be changed if you intend to use your USB devices in Windows.

  • Page 126: Security Menu

    BIOS Utilities Security Menu Figure 5 - 4 PhoenixBIOS Setup Utility Security Menu Main Advanced Security S S e e c c u u r r i i t t y y Exit Item Specific Help Supervisor Password Is: Clear User Password Is: Clear Supervisor Password...
  • Page 127 BIOS Utilities Set User Password (Security Menu) You can set a password for user mode access to the Setup utility. This will not affect access to the computer OS (only the Setup utility). Many menu items in the Setup utility cannot be modified in user mode. You can only set the user password after you have set the supervisor password.

  • Page 128: Boot Menu

    BIOS Utilities Boot Menu Figure 5 - 5 PhoenixBIOS Setup Utility Boot Menu Main Advanced Security Exit Boot Item Specific Help Removable Devices Keys used to view or CD-ROM Drive configure devices: +Hard Drive <Enter> expands or collapses devices with a + or - <Ctrl+Enter>...
  • Page 129 BIOS Utilities When you specify a device as a boot device on the Boot Menu, it requires the availability of an operating system on that device. Most home computers come with an operating system already installed on “Drive C:”. If you wish to boot from a CD-ROM you will need to add it to the boot order. As a general rule the order below is recommended: Removable Devices (usually external USB floppy disks) CD-ROM Drive...

  • Page 130: Configuring The Network Boot Protocol

    BIOS Utilities Configuring the Network Boot Protocol The system supports booting from FDD, HDD, CD or LAN (network). To boot from a network. Follow the full instructions in the sidebar to configure Enabling Network the network boot protocol. Boot At startup, press and Realtek RTK8139(X)/8130/810X Boot Agent hold the Shift and F10 Press Shift-F10 to configure ..

  • Page 131: Exit Menu

    BIOS Utilities Exit Menu Figure 5 - 7 PhoenixBIOS Setup Utility Exit Menu Main Advanced Security Boot Exit Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Exit System Setup and save your changes to Load Setup Defaults CMOS. Discard Changes Save Changes Help...
  • Page 132 BIOS Utilities 5 - 16...

  • Page 133: Upgrading The Computer

    Upgrading The Computer Chapter 6: Upgrading The Computer Overview This chapter contains information on upgrading the computer. Follow the steps outlined to make the desired upgrades. If you have any trouble or prob- Warranty Warning lems you can contact your service representative for further help. Before you Please check with your begin you will need: service representative...

  • Page 134: When Not To Upgrade

    Upgrading The Computer When Not to Upgrade These procedures involve opening the system’s case, adding and sometimes replacing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake any upgrade proce- • Your system is still under warranty or a service contract dures, make sure that •...

  • Page 135: Removing The Battery

    Upgrading The Computer Removing the Battery If you are confident in undertaking upgrade procedures yourself, for safety reasons it is best to remove the battery. Under normal circumstances we rec- Warranty Warning ommend that you do not remove the battery. Please check with your service representative Turn the computer off, and turn it over and locate the battery bay.

  • Page 136: Upgrading The Hard Disk Drive

    Upgrading The Computer Upgrading the Hard Disk Drive The hard disk drive can be taken out to accommodate other 2.5" IDE hard disk drives with a height of 9.5mm (h) (see “Storage” on page B - 3). Follow your HDD System Warning operating system’s installation instructions, and install all necessary drivers and utilities as outlined in...
  • Page 137 Upgrading The Computer Grip the plastic loop at point and carefully, but firmly, easing it in the direction indicated by the arrow. Figure 6 - 3 HDD Assembly Removal Lift the HDD assembly out of the computer’s hard disk bay (note when you reinsert the hard disk it should be inserted at an angle towards the side illustrated above).
  • Page 138 Upgrading The Computer Remove screws from the hard disk assembly. Figure 6 - 4 HDD Case Screws & Connector Cable Take the HDD out of the case. Insert the new HDD into the case and replace screws Slide the hard disk assembly into the hard disk bay as illustrated in Figure 6 6 - 6 Upgrading the Hard Disk Drive...

  • Page 139: Upgrading The System Memory (Ram)

    Upgrading The Computer Upgrading the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO-DIMM) type memory modules supporting DDR SDRAM SODIMM (2.5V) - DDR 266/ DDR 333. The main memory can be expanded up to 1024MB.
  • Page 140 Upgrading The Computer Remove any currently installed module, if it needs to be upgraded or replaced Gently pull the two release latches on the sides of the memory socket toward the sides of the computer. Contact Warning Release Latches Be careful not to touch the metal pins on the module’s connecting...
  • Page 141 Upgrading The Computer The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it will go. DO NOT FORCE the module; it should fit without much pressure. Press the module in and down towards the mainboard until the slot levers click into place to secure the module.

  • Page 142: Upgrading The Optical Device

    Upgrading The Computer Upgrading the Optical Device Turn off the computer, turn it over and remove the battery. & Remove screws , and then remove the hard disk cover Figure 6 - 7 HDD Cover Removal 6 - 10 Upgrading the Optical Device...
  • Page 143 Upgrading The Computer Remove screw , then use a screwdriver to carefully push the optical Figure 6 - 8 device assembly out of the computer. Optical Device Removal Insert the new device and carefully slide it into the computer (the device only fits one way).

  • Page 144: Upgrading The Processor

    Upgrading The Computer Upgrading the Processor If you want to upgrade your computer by replacing the existing processor with a faster/new one you will need to contact your customer service representa- Warranty tive. We recommend that you do not do this yourself, since if it is done incor- The CPU is not a user rectly you may damage the processor or mainboard.

  • Page 145: Troubleshooting

    Troubleshooting Chapter 7: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.

  • Page 146: Basic Hints And Tips

    Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer appears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working.

  • Page 147: Backup And General Maintenance

    Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g.

  • Page 148: Viruses

    Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the definitions file updates are usually downloadable directly from the internet.

  • Page 149: Upgrading And Adding New Hardware/Software

    Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
  • Page 150 Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. •...

  • Page 151: Power

    Troubleshooting Power Problem Possible Cause - Solution You turned on the power Battery missing / incorrectly installed. Check the battery bay, make sure the battery is but it doesn’t work. present and seated properly (the design of the battery only allows it to go in one way). Make sure there’s nothing interfering with the battery contacts.
  • Page 152 Troubleshooting Problem Possible Cause - Solution The computer feels too Make sure the computer is properly ventilated and the vents/fan intakes are not blocked. If hot. this doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating”...

  • Page 153: Display

    Troubleshooting Display Problem Possible Cause - Solution Nothing appears on The system is in a power saving mode. Toggle the sleep/resume key combination, Fn + F4 screen. (see “Function Keys” on page 2 - 13). The screen controls need to be adjusted. Toggle the screen control key combinations Fn + F8/F9 (see “Advanced Video Controls”...

  • Page 154: Audio & Cd Device

    Troubleshooting Audio & CD Device Problem Possible Cause - Solution The sound cannot be The volume might be set too low. Check the volume control in the Volume Control Panel heard or the volume is in the Windows taskbar, or use the key combination Fn + F5 and F6 (see “Function very low.

  • Page 155: Keyboard

    Troubleshooting Keyboard Problem Possible Cause - Solution Unwelcome numbers If the LED is lit, then Num Lock is turned ON (see “LED Status Indicators” on page 2 appear when typing. Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically.

  • Page 156: Operation

    Troubleshooting Operation Problem Possible Cause - Solution The system freezes or The system’s power saving features have timed-out. Use the AC adapter, press the sleep the screen goes dark. (Fn + F4) key combination, or press the power button if no LEDs are lit. A software conflict made the system “crash”.

  • Page 157: Modules

    Troubleshooting Modules Problem Possible Cause - Solution The Wireless LAN or The modules are off. Check the LED indicator to see if the modules are on or off (see Bluetooth modules “LED Status Indicators” on page 2 - 5). If the LED indicator is off, then press the WLAN cannot be detected.
  • Page 158 Troubleshooting 7 - 14...

  • Page 159: Advanced Power Saving

    Appendix A: Advanced Power Saving This Appendix contains information on Power Schemes and how they affect the computer’s CPU performance, and information on Intel CPU Speed Step controls. A - 1...
  • Page 160 Power Schemes & Processor Performance Windows defines four control policies (see sidebar) used with each power scheme. Windows Control Policies Constant CPU’s Power Scheme AC Power DC Power performance always runs at lowest level Home/Office Desk None Adaptive Adaptive ~ CPU’s per- Portable/Laptop Adaptive Adaptive...

  • Page 161: Intel Cpu Speedstep Controls

    Intel CPU SpeedStep Controls Additional features are available to support the Intel Pentium M processor’s Windows XP Service mobile power management features. (It is not necessary to download and run Pack 1 Driver to the updated driver if you have an Intel Celeron M processor. Support Power Management Features Windows 2000, and Windows XP with Service Pack 1 or higher installed, sup-...

  • Page 162: Checking The Processor Driver Version

    Checking the Processor Driver Version 1. If you can see the My Computer icon on your desktop (if you cannot see the My Computer icon go to step 2) click on it once to select it, then right-click it to make the sub-menu appear and scroll down to Properties and click on it (go to step 3).
  • Page 163 Updated driver Figure A - 1 Processor Driver Version (WinXP SP1) If you do not see the suffix gv3.sys you will need to download and install the driver (see the instructions on page A - 3). When the driver is downloaded fol- low the two part instructions on the following page to install and run the driver (you will need to Unzip the contents of the Zip file to a location on your hard disk).

  • Page 164: Installing The Driver

    Installing the Driver 1. If you can see the My Computer icon on your desktop (if you cannot see the My Computer icon go to step 2) click on it once to select it, then CPU Performance with right-click it to make the sub-menu appear and scroll down to Properties SpeedStep and click on it (go to step 3).

  • Page 165: Specifications

    Appendix B: Specifications Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly proces- sor types/speeds) may be changed or updated due to the manufacturer's release schedule. Check with your service center for details.
  • Page 166 Feature Specification µ µ Processor Types Intel® Pentium® M Processor (478-pin) 0.13) 0.13 Micron Process Technology, 1MB PGA Package On-die L2 Cache & 400MHz Front Side Bus - 1.3/1.4/1.5/1.6/1.7 GHz µ µ Intel® Pentium® M Processor (478-pin) 0.09) 0.09 Micron Process Technology, 2MB PGA Package On-die L2 Cache &...
  • Page 167 Feature Specification 12.1" XGA TFT LCD 4:3 Panel (Design I) 12.1" WXGA TFT LCD 16:9 Panel (Design II) Display Intel 855GME Integrated Video Integrated High Quality 3D Graphics Engine Accelerator Supporting Dual Analog Independent Display Storage One of the Following Changeable 12.7mm(h) Drive Options - CD-ROM/ DVD-ROM/ CD-RW/ DVD-ROM &...
  • Page 168 Feature Specification Interface & Two USB 2.0 Ports One RJ-45 Jack (Local Area Network) Communication One Infrared Transceiver (IrDA 1.1 FIR/SIR/ 10/100 BASE-T Compatible ASKIR) Video Camera Module (Factory Option) Infrared Transfer 1cm ~ 1M Operating Integrated V.90/56K MDC Modem (V.92 Distance Compliant) 115.2K bps SIR...
  • Page 169 Feature Specification Environmental Temperature Relative Humidity ° ° Spec Operating: C ~ 35 Operating: 20% ~ 80% Non-Operating: -20°C ~ 60°C Non-Operating: 10% ~ 90% Physical 295mm (w) * 235mm (d) * 26-33mm (h) 1.7kg without Battery Dimensions & Weight Optional DVD-ROM Drive Module Software DVD Player...
  • Page 170 B - 6...

Table of Contents