Displaying System Information - Fujitsu SPARC EnterpriseM3000 User Manual

4.1.1

Displaying System Information

■
1. Use the showhardconf(8) command to check the mode switch status.
XSCF> showhardconf
SPARC Enterprise xxxx;
:
2. Use the showdate(8) command to display the system time.
XSCF> showdate
Thu Jul 6 14:48:01 UTC 2006
3. Use the version(8) command to display the XCP comprehensive firmware
version, XSCF version, and OpenBoot PROM version.
XSCF> version -c xcp -v
XSCF#0 (Active)
XCP0 (Current): 1082
OpenBoot PROM : 02.09.0000
XSCF
XCP1 (Reserve): 1082
OpenBoot PROM : 02.09.0000
XSCF
XSCF#1 (Standby )
XCP0 (Current): 1082
OpenBoot PROM : 02.09.0000
XSCF
XCP1 (Reserve): 1082
OpenBoot PROM : 02.09.0000
XSCF
OpenBoot PROM BACKUP
#0: 02.08.0000
#1: 02.09.0000
(This screenshot is provided as an example.)
4-2 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Command operation
+ Serial:PP20605005; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Powered Off;
MBU_B Status:Normal; Ver:0101h; Serial:7867000282
: 01.08.0005
: 01.08.0005
: 01.08.0005
: 01.08.0005
;