Symantec 10521146 - Network Security 7120 Administration Manual page 97

To edit a monitoring interface on a 7100 Series node
1
On the Devices tab, right-click an existing monitoring interface object, and
click Edit on the pop-up menu.
2 In Edit Monitoring Interface, optionally enter a descriptive name.
See "Name" on page 77.
3 In Customer ID, optionally enter a Customer ID.
See "Customer IDs"
4 In Expected Throughput, click the expected throughput on the pull-down
list.
5 In TCP Reset Interface, click the reset interface on the pull-down list.
The reset interface must be cabled to access the monitored network. See the
Symantec Network Security 7100 Series Implementation Guide.
6 In Description, enter an optional description of up to 255 characters, and
click OK.
See "Description"
Note: Click Topology > Save Changes before quitting the Network Security
console. You will lose any unsaved changes when you exit.
See "Deleting objects"
About the Networks tab
The Networks tab lists the networks that this interface monitors. Replace the
default entry with valid monitored networks before starting a sensor on the
interface.
on page 77.
on page 77.
on page 81.
Populating the topology database
Adding nodes and objects
97