Symantec 10521146 - Network Security 7120 Administration Manual page 251

Note: This parameter refers only to the amount of data archived, not to the total
disk usage.
To configure this parameter
1 Click Configuration > Node > Network Security Parameters.
2
In Select Node, choose the node from the pull-down list, and click OK.
3 In the left pane, under Log & Database Parameters, click Limit Size for
Archive Directory.
4 In the lower right pane, enter a size in GB.
5 Click Apply.
6
In Apply Changes To, select the node to which to apply the parameter.
7 Click OK to save the changes to this node and close.
Setting Limit Size for Traffic Record Directory
Limit Size for Traffic Record Directory indicates the size at which Symantec
Network Security clears the traffic record directory. If traffic record files take
more disk space than indicated by this value, then files are removed, starting
with the oldest, to satisfy the limit.
The default value is 5 GB, and the minimum effective value is 1 GB. If this
parameter is not set, then the traffic record directory is not cleared at any size.
Note: If Limit Size for Traffic Record Directory is configured to any value greater
than 0, Symantec Network Security automatically clears the traffic record
directory each time the size limit is breached. If this occurs as you are
attempting to replay it, an error message appears. Simply close and reopen the
window to refresh the available contents.
Note: This parameter refers only to the amount of data recorded, not to the total
disk usage.
To configure this parameter
1 Click Configuration > Node > Network Security Parameters.
2 In Select Node, choose the node from the pull-down list, and click OK.
Managing log files
Configuring automatic archiving
251