Symantec 10521146 - Network Security 7120 Administration Manual page 143

3 In Configure Response Action, click Email Notification.
4 Enter a subject, and any of the following optional variables:
To: Enter the destination of the email notification.
■
Subject: Enter the subject line of the email notification.
■
Maximum number of email notifications: Enter the number of
■
notifications you want to send about this event.
Delay between email notifications (mins): Enter the time in minutes
■
that you want Symantec Network Security to wait before sending
another notification.
5 In Configure Response Action, click OK to save and exit.
6 In Response Rules, click OK to save and exit.
Setting email notification parameters
The Network Security console provides a way to establish automatic notification
response policies to alert you via email under specific conditions. Use the
notification parameters to configure these procedures:
Setting From Address
■
Setting Subject Line
■
Setting SMTP Server
■
Setting Hostname Used for Email Notifications
■
Setting From Address
From Address indicates the email address from which Symantec Network
Security sends email notifications. The default value is
To configure this parameter
1 Click Configuration > Node > Network Security Parameters.
2
In Select Node, choose the node from the pull-down list, and click OK.
3 In the left pane, click From Address.
4 In the lower right pane, enter the email address.
5 Click Apply.
6 In Apply Changes To, select the node to which to apply the parameter.
7 Click OK to save the changes to this node and close.
Responding
Setting response actions
.
root@localhost
143