Reverting Changes; Saving Changes - Symantec 10521146 - Network Security 7120 Administration Manual

82 Populating the topology database
Managing the topology tree

Reverting changes

Saving changes

Caution: Click Topology > Save Changes before quitting the Network
Security console. You will lose any unsaved changes when you exit.
Caution: When an object is deleted, all of its sub-objects are also deleted.
Note: SuperUsers can add, edit, and delete any nodes (both software and
appliance nodes) or objects that they create. Administrators, StandardUsers,
and RestrictedUsers can view them, but cannot add, edit, or delete them. See
"User groups reference"
The Network Security console provides a way to undo, cancel, or revert changes
to the topology tree, if you change your mind before saving.
Note: SuperUsers and Administrators can undo, cancel, or revert changes to the
topology tree; StandardUsers and RestrictedUsers cannot. See
reference" on page 319 for more about permissions.
To undo changes to the topology tree
If you want to undo the changes that you made, click Topology > Revert
◆
Changes before saving changes.
The Network Security console provides a way to save all changes to the topology
tree. Any unsaved changes will be lost upon quitting the Network Security
console.
To save changes to the topology tree
To save your changes to the topology tree, click Topology > Save Changes
◆
before quitting the Network Security console. It can take a few minutes for
topology changes to process.
Caution: Any unsaved changes are lost upon quitting the Network Security
console.
on page 319 for more about permissions.
"User groups