Symantec 10521146 - Network Security 7120 Administration Manual page 100

100 Populating the topology database
Adding nodes and objects
Adding or editing in-line pairs
The Network Security console provides a way to add and edit in-line pair objects
on a 7100 Series node.
To add or edit an in-line pair
1 On the Devices tab, do one of the following:
Right-click the 7100 Series node object, and click Add In-line Pair on
■
the pop-up menu.
Right-click an existing in-line pair object, and click Edit on the pop-up
■
menu.
2 In Add In-line Pair or Edit In-line Pair, enter a descriptive name.
See "Name" on page 77.
3 In Expected Throughput, click the expected throughput on the pull-down
list.
4 In Pair, click the interface pair on the drop-down list.
The selected interfaces must be cabled for in-line mode. See the Symantec
Network Security 7100 Series Implementation Guide.
5 In Description, enter an optional description of up to 255 characters.
See "Description"
6 On the Networks tab, click Add, enter a network IP address in CIDR format,
and click OK.
Enter all networks monitored by this in-line pair.
on page 77.