Symantec 10521146 - Network Security 7120 Administration Manual page 47

Adjusting the Incidents view
You can adjust the display of the events and incidents tables in the Incidents tab
as follows:
To adjust the font size of the display
In the Incidents tab, click Configuration > Table Font Size > OK.
■
Adjusting the Policies view
You can adjust the display of the list of event types in the Policies tab, to view a
workable subset. To do this, see
Viewing node status
The Network Security console displays an object in the topology tree
representing devices and interfaces in the network. When a software or
appliance node experiences a process failure of any kind, the Network Security
console displays the node with a red X, called the Node Status Indicator. This
signifies that Network Security processes or connectivity to the network has
failed.
To view node status
◆ See the Node Status Indicator for the software or appliance node.
A red X or Node Status Indicator signifies that Network Security
processes or network connectivity failed on a software or
appliance node.
Restarting via the Network Security console
The Network Security console provides a way to restart both Network Security
software nodes and 7100 Series appliance nodes easily. Restarting includes the
Symantec Network Security software and enables you to address an intermittent
problem.
Note: SuperUsers can restart both software and appliance nodes from the
Network Security console; Administrators, StandardUsers, and RestrictedUsers
cannot. See "User groups reference"
To restart Symantec Network Security
1 In the Network Security console, click Admin > Node > Restart
Network Security Application
About the management interfaces
"Adjusting the view of event types"
on page 319 for more about permissions.
.
Getting started 47
on page 117.
Symantec