Table of Contents
Advertisement
54 Getting started
Managing user access
Managing user access
Stopping via the LCD panel
You must have the secadm password to stop Symantec Network Security on the
appliance from the LCD panel.
If the LCD panel is locked, see
follow this procedure to restart Symantec Network Security.
To stop Symantec Network Security from the LCD panel
1
On the appliance front panel, press any button to display the LCD run menu
unless it is already displayed on the LCD screen.
2
Use the down arrow button to scroll through the numbered menu choices
until you see:
SNS7100
3. Stop SNS
3
Press e to stop Symantec Network Security on the appliance.
Shutting down via the LCD panel
You must have the secadm password to shut down the appliance from the LCD
panel.
If the LCD panel is locked, see
follow this procedure to restart Symantec Network Security.
To shut down an appliance from the LCD panel
1
On the appliance front panel, press any button to display the LCD run menu
unless it is already displayed on the LCD screen.
2
Use the down arrow button to scroll through the numbered menu choices
until you see:
SNS7100
5. Shutdown Host
3
Press e to shut down and power off the appliance.
Symantec Network Security provides an efficient way to administer user access
using four predefined groups: SuperUser, Administrator, StandardUser, and
RestrictedUser. The installation procedure creates one user login account in the
SuperUser group with full access and all permissions. At any time after
installation, this SuperUser can create additional user login accounts in any of
Unlocking the LCD
panel. After it is unlocked,
Unlocking the LCD
panel. After it is unlocked,
Advertisement
Table of Contents
