Reports Per Event Schedule; Reports By Event Characteristics - Symantec 10521146 - Network Security 7120 Administration Manual

Reports per event schedule

Reports by event characteristics

Symantec Network Security generates the following types of event reports:
Table 9-3 Types of event reports
Type Description
Events per month This report displays the total number of events detected per
month during the time period you specify.
If a month is not listed in the report, then no events were detected
during that month. Symantec Network Security generates this
report in table and column chart formats. You can generate several
drill-down reports for each month listed in the Events Per Month
report.
Events per day This report displays the total number of events detected per day
during the time period you specify. If a day is not listed in the
report, then no events were detected during that day. Symantec
Network Security generates this report in table and column chart
formats. You can generate several drill-down reports for each day
listed in the Events Per Day report.
Events per hour This report displays the total number of events detected per hour
during the time period you specify. If an hour is not listed in the
report, then no events were detected during that hour. Symantec
Network Security generates this report in table and column chart
formats. You can generate several drill-down reports for each hour
listed in the Events Per Hour report.
Symantec Network Security generates the following types of event reports:
Table 9-4 Types of event reports
Type Description
Events by classful This report sorts events by their destination IP addresses, and
destination presents a count of the number of addresses that are from class A,
class B and class C networks. Specify report start and end
dates/times, and maximum number to display. This report is
generated in table, column and bar chart formats. This report has
no drill-down reports.
Reporting
About top-level report types
233