Symantec 10521146 - Network Security 7120 Administration Manual page 305

Saving initial configuration to the hard drive
If no compact flash card is available during the save operation, the
configuration is saved to the hard drive on the node.
To save an initial configuration to the hard drive
1 Do one of the following:
On Devices, right-click the 7100 Series node object whose configuration
■
you wish to save, then click Configuration > 7100 Series Configuration
> Save Configuration File.
IOn Devices, click Configuration > Node > 7100 Series Configuration >
■
Save Configuration File and choose a node from the pull-down list in
Select Node. Click OK.
2 In Appliance Network Configuration, type the node netmask for Netmask.
3 Type a value for Default Router.
This should be the IP address of the default router for this node.
Note: Values for the netmask and default router will be automatically
updated after the slave appliance is connected to the network and initially
configured. These values will appear on the Advanced Network Options tab
when you edit the node.
4 Optionally type values for DNS Server 1 and DNS Server 2.
5 Click OK.
6
In the Save Config File window, do one of the following:
In File Name, click after the given path, enter a file name for the
■
backup beginning with an appropriate slash character, and click Save.
For example, on Windows:
\NodeA_backup1
Click Save. This saves the node configuration into the default file:
■
<path>\appcfg.enc
Browse to a different folder, enter a file name in the File Name text box,
■
then click Save.
Note: The enc suffix is applied to any file name you enter. It means the file is
encrypted. This is an automatic process and does not require you to enter a
key or password.
Advanced configuration
Backing up and restoring
305