Setting Export Flow Response Action - Symantec 10521146 - Network Security 7120 Administration Manual

Administration guide
Hide thumbs Also See for 10521146 - Network Security 7120:
Table of Contents

Advertisement

Setting export flow response action

To enable specific console response actions
1
In the Network Security console, click Configuration > Response Rules.
2
In Response Rules, click Configuration > Console Response Configuration.
3
In Local Console Configuration, choose from the following checkboxes:
Play Alert Sounds: Click this to enable this Network Security console
to emit an alert sound when triggered by an event.
Execute Programs: Click this to enable this Network Security console
to perform the console response action.
4
In Local Console Configuration, click OK to save and close.
Note: The Network Security console must be running in order for Symantec
Network Security to execute the console response action. If a Network
Security console starts after console response events are sent, it does not
execute the actions. Instead, upon startup, it displays a prompt indicating
that the actions did not execute.
The export flow response action exports matching flows stored in the flow data
store. The action is based on the characteristics of the triggering events, which
are specified by parameters that the SuperUser provides when creating the rule.
The SuperUser or Administrator can use Export Flow to specify the event
characteristics of the triggering event. Flows that match the specified
characteristics are exported and saved. The minimum delay between responses
is 1 minute.
To configure export flow response actions
1
In the Network Security console, click Configuration > Response Rules.
2
In Response Rules, click the Response Action column of a rule.
3
In Configure Response Action, click Export Flows.
4
Provide the following information:
Limit for the number of flows to export: Enter the maximum number of
flows to export per incident. The default limit per policy match is 100,
the minimum is 1, and the maximum is 2048.
Maximum # of flow export actions: Enter the maximum number of
attempts to export flows per incident. The default per incident is 10,
the minimum is 1, and the maximum is 256.
Responding
Setting response actions
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network security

Table of Contents