Table of Contents
Advertisement
Establishing high availability failover
Monitoring node availability
Launching from a known location
This section describes how to launch the Symantec Decoy Server console from a
known location on the network.
To launch the Symantec Decoy Server console from a known location
1
Right-click any external sensor object in the topology tree, and click Start
Decoy Console.
2
In Start Decoy Console, click Yes to confirm the path to the
file.
Note: The Symantec Decoy Server console must be closed independently of
the Network Security console. The Symantec Decoy Server console remains
open, even if you close the Network Security console.
Note: SuperUsers and Administrators can add Smart Agents to launch Symantec
Decoy Server; all users can launch it after configuration. See
reference"
on page 319 for more about permissions.
Symantec Network Security provides a number of ways to recover from
network, communication, or process failures. The Availability Monitor keeps
track of each node on the network and notifies you if the node fails or becomes
unavailable. The Watchdog Process Restart parameter keeps track of processes
on a single node. If a process fails, the failure recovery feature notes the failure
and takes action to restart that process. Failover groups, configured with the
watchdog parameters, ensure detection coverage even if a node should fail.
This section describes these topics in greater detail:
Monitoring node availability
■
Configuring availability for single nodes
■
Configuring availability for multiple nodes
■
Configuring watchdog processes
■
Symantec Network Security provides the Availability Monitor to keep track of
each node on the network and notify you if the node fails or becomes
unavailable. The Availability Monitor attempts to connect to each node at
Advanced configuration
Establishing high availability failover
mtadmin.jar
"User groups
287
Advertisement
Table of Contents
