Symantec 10521146 - Network Security 7120 Administration Manual page 46

46 Getting started
About the management interfaces
If in a cluster, all nodes must use the same port number.
4 In Username, enter the user name. Access and permissions depend on the
user group of your login account.
5 In Passphrase, enter the passphrase established for your user login account,
and click OK.
Caution: If a non-SuperUser uses the wrong passphrase, an Incorrect
Username or Passphrase message appears. If this occurs multiple times (as
specified by the Maximum Login Failures parameter), the Network Security
console locks the non-SuperUser out. Even if the correct passphrase is used
at that point, access is denied. Contact the SuperUser to create a new
passphrase.
Viewing the Network Security console
The Network Security console contains three main tabs that provide a view of
the network topology, the network traffic, and the detection and response
functionality:
The Devices tab provides a hierarchical tree view of the network topology
■
with a detailed summary of each device.
The Incidents tab provides detailed descriptions of security incidents and
■
their correlated events taking place in the network, including sub-levels of
packet detail.
The Policies tab provides the area for managing protection policies and
■
automated responses at the point of entry.
Adjusting the Devices view
You can adjust the display of the network topology tree in the Devices tab as
follows:
To display the entire topology tree
In the Devices tab, click Topology > Expand All Objects.
■
To display all device objects and hide all interface objects
In the Devices tab, click Topology > Expand Categories.
■
To display the first level of objects in the topology tree
In the Devices tab, click Topology > Collapse All Objects.
■