Commands Of Cli - Waters Network Systems GSM2108 Operating Manual

6.2

Commands of CLI

To see the commands of the mode, please input "?" after the prompt, then all commands will be
listed in the screen. All commands can be divided into two categories, including global commands and
local commands. The following global commands can be used in any mode:
Exit
End
Help
History
Logout
Save start
Save user
Restore default
Restore user
Command instructions residing in the corresponding modes are local commands. The same commands
can be used in different modes and will perform a different function resulting in totally different information.
For example, show in IP mode displays the IP information; however, in system mode, it will display the
system information.
The following table lists the CLI commands and descriptions.
Command Syntax
Global Commands
End end
Exit exit
Help help
Waters Network Systems
Figure 6-2
Description
Return to top mode
Returns to previous mode
Displays available commands.
User's Manual
GSM-2108/GSM-1008SFP
Argument
None
None
None
Page 105
Possible
Value
None
None
None