Waters Network Systems GSM2108 Operating Manual page 107

Command Syntax
Local Commands
802.1x
Set max- set max-
request request <port-
range> <times>
Set mode set mode
<port-range>
<mode>
Set port- set port-control
control <port-range>
Set quiet set quiet-period
period <port-range>
>sec>
Set set
reAuthEnabled reauthenabled
>port range>
<ebl>
Set reAuthMax set reauthmax
Set Set
ReAuthPeriod reauthperiod
<port-range>
<sec>
Waters Network Systems
Description
current configuration into the
non-volatile FLASH as the user-
defined configuration.
This command sets the number
of times the state machine will
retransmit an EAP request
packet to the Supplicant before
it times out the authentication
session.
This command is used to set up
the 802.1x authentication mode
of each port
Use this command to set up the
802.1x status of each port
This command is used to define
periods of time when the
authenticator state machine will
not attempt to acquire a
supplicant.
Use to define whether regular
reauthentication will take place
on a particular port
Use to set the number of
reauthentication attempts that
are permitted before the port
becomes unauthorized.
This command sets a constant
that defines a non zero number
of seconds between periodic
reauthentication of the
supplicant.
User's Manual
GSM-2108/GSM-1008SFP
Argument
<port range>: syntax
1, 5-7, available from
1 to 8
<times>: max-times,
range 1-10
<port range>: syntax,
1, 5-7, available from
1 to 8
<mode>: set up
802.1x mode
0:disable the 802.1x
function
1:set 802.1x to
multihost mode
<port range>: syntax
1, 5-7, available from
1 to 8
<authorized>: set up
the status of each
port
0:ForceUnauthorized
1:ForceAuthorized
2:Auto
<port range>: syntax
1, 5-7, available from
1 to 8
<sec>: timer, range
0-65535
<port range>: syntax
1, 5-7, available 1 to
8
<ebl> : 0 :OFF
Disable
reauthentication
1 :ON Enable
reauthentication
<port range>: syntax
1, 5-7, available 1 to
8
<max> : max. value,
range 1-10
<port range>: syntax
1, 5-7, available 1 to
8
<sec> : timer, range
1-65535
Page 107
Possible
Value
<port range> 1
to 8 <times>: 1-
10, default is 2
<port range>: 1
to 8
<mode>: 0 or 1
<port range>: 1
to 8
<authorized>:
0, 1 or 2
<port range>: 1
to 8
<sec>:
0~65535,
default is 60
<port range>: 1
to 8
<ebl>: 0 or 1,
default is 1
<port range> :
1 to 8
<max> : 1-10,
default is 2
<port range>: 1
to 8
<sec> :
1~65535,
default is 3600