Gsm-2108/Gsm-1008Sfp - Waters Network Systems GSM2108 Operating Manual

Table of Contents

Advertisement

Used to declare the Join Time in unit of centisecond. Valid time range: 20 –100 centisecond,
Default: 20 centisecond.
Leave Time:
Used to declare the Leave Time in unit of centisecond. Valid time range: 60 –300 centisecond,
Default: 60 centisecond.
Leave All Time:
A registered device will be de-registered at the end of this time period. If someone still issues a
new join, then a registration will be kept in the switch. Valid range: 1000-5000 unit time, Default:
1000 unit time.
Default Applicant Mode:
There are two modes that indicate the type of participant:
participant.
Normal:
In the normal participant mode, the switch participates normally in GARP protocol
exchanges. The default setting is Normal.
Non-Participant:
In the
messages. The switch listens for messages and reacts for the received GVRP BPDU.
Default Registrar Mode:
There are three types of parameters for registrar mode: registrar administrative control value,
normal registrar, fixed registrar and forbidden registrar.
Normal:
The Registrar responds normally to incoming GARP messages. The default setting is
Normal.
Fixed:
The Registrar ignores all GARP messages, and all members remain in the registered
(IN) state.
Forbidden:
The Registrar ignores all GARP messages, and all members remain in the
unregistered (EMPTY) state.
Restricted Mode:
This function is used to restrict dynamic VLAN be created when this port received GVRP PDU.
There are two modes: disable and enable.
Disabled:
In this mode, the switch dynamic VLAN will be created when this port received GVRP
PDU. The default setting is Normal.
Enabled:
In this mode, the switch does not create dynamic VLAN when this port received
GVRP PDU. Except received dynamic VLAN message of the GVRP PDU is an
existed static VLAN in the switch. This port will be added into the static VLAN
members dynamically.
Waters Network Systems
non-participant mode, the switch does not send or reply any GARP
User's Manual

GSM-2108/GSM-1008SFP

normal participant and non-
Page 70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsm1008-2sfp

Table of Contents