Table of Contents
Advertisement
5.28
Reboot
There are a few ways to reboot the switch, including power up, hardware reset and software
reset. You can press the RESET button in the front panel to reset the switch. After upgrading
software, changing IP configuration or modifying VLAN configurations, you must reboot in order
for the new configuration to take effect.
Function name:
Reboot
Function description:
Reboot the switch. Reboot takes the same effect as the RESET button on the front panel of the
switch. It will take around thirty (30) seconds to complete the system boot.
Parameter description:
Save and Reboot:
Save the current settings as start configuration before rebooting the switch.
Reboot:
Reboot the system directly.
Waters Network Systems
Figure 5.73 – Firmware Upgrade
Figure 5.74 - Reboot
User's Manual
GSM-2108/GSM-1008SFP
Page 102
Advertisement
Table of Contents
