Waters Network Systems GSM2108 Operating Manual page 29

Table of Contents

Advertisement

since it passed over.
The switch supports valid configurable daylight saving time is –5 ~ +5 step one hour. The zero
for this parameter means it need not have to adjust current time, equivalent to in-act daylight
saving. You don't have to set the starting/ending date as well. If you set daylight saving to be
non-zero, you have to set the starting/ending date as well; otherwise, the daylight saving
function will not be activated.
Default for Daylight Saving: 0.
The following parameters are configurable for the function Daylight Saving and described in
detail.
Daylight Saving Start :
This is used to set when to start performing the daylight saving time.
Month:
Day:
Hour:
Daylight Saving End :
This is used to set when to stop performing the daylight saving time.
Month:
Day:
Hour:
Waters Network Systems
Range is 1 ~ 12.
Default: 1
Range is 1 ~ 31.
Default: 1
Range is 0 ~ 23.
Default: 0
Range is 1 ~ 12.
Default: 1
Range is 1 ~ 31.
Default: 1
Range is 0 ~ 23.
Default: 0
User's Manual
GSM-2108/GSM-1008SFP
Page 29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsm1008-2sfp

Table of Contents