Table of Contents
Advertisement
5.23
Configuration
The switch supports three copies of configurations, including the default configuration, working
configuration and user configuration for your configuration management. The three copies are
described below:
Note: If you make changes to the configuration, you must save the configuration before
rebooting the switch.
Default Configuration:
The factory setting and cannot be altered.
Working Configuration:
The working configuration is the current configuration and can be changed any time. The
configurations you are using are saved into this configuration file. This is updated each time
you click on Apply.
User Configuration:
User configuration is the specified file for backup purposes and can be updated while
confirming the configuration. You can retrieve this configuration by performing Restore User
Configuration.
Waters Network Systems
Figure 5.61 - Configuration
User's Manual
GSM-2108/GSM-1008SFP
Page 93
Advertisement
Table of Contents
