Gsm-2108/Gsm-1008Sfp - Waters Network Systems GSM2108 Operating Manual

Function name:
Email/SMS Configuration
Function description:
Alarm configuration is used to configure the recipients of the alarm message via email or SMS, or
both. The method is dependent on the settings. An email address or a mobile phone number has to
be set in the alarm configuration (See Figure 5.60). If set properly, you can read the trap information
from your email or mobile phone. This function provides up to six email addresses and up to six
mobile phone numbers. The 24 trap events will be sent out to SNMP Manager when trap event
occurs. Once trap events have been selected, enter your desired email addresses and mobile phone
numbers. Select Apply to complete the alarm configuration. The alarm settings will take effect in a
few seconds.
Note: SMS may not work in your mobile phone system. It is customized for different systems.
Parameter description:
Email:
Mail Server: IP address of the server transferring your email.
Username: Username on the mail server.
Password: Password on the mail server.
Email Address 1 – 6: Additional email addresses that would like to receive the alarm message.
SMS:
SMS Server: IP address of the server transferring your SMS.
Username: Username in ISP.
Password: Password in ISP.
Mobile Phone 1-6: Additional mobile phone numbers that would like to receive the alarm
message.
Waters Network Systems
Figure 5.60 – Alarm Configuration
User's Manual

GSM-2108/GSM-1008SFP

Page 92