Managed switch with eight 10/100/1000base-tx ports plus one mini gbic slot for 1000base-sx or lx fiber or one 10/100/1000base-tx port eight poe ports (108 pages)
Managed switch with twenty four 10/100base-tx poe ports plus two mini gbic slots for 1000base-sx or lx fiber connectivity or 10/100/1000base-tx copper connectivity (137 pages)
100 to 240 VAC, 50 to 60Hz Power Consumption 17 watts maximum OPERATING ENVIRONMENT Ambient Temperature: 32° to 122°F (0° to 50°C) Ambient Humidity 0% to 90% MECHANICAL: Cooling Method: Fan cooled Waters Network Systems User’s Manual Page 3 GS-1008/GS-1008-TX...
Page 4
PHYSICAL CHARACTERISTICS Dimensions GS-1008: 4.8 x 7.8 x 1.4 in 35.3 x 197.2 x 120 mm Dimensions: GS1008-TX 11 x 10.25 x 2 in (279 x 267 x 51 mm) WARRANTY: Limited Lifetime Waters Network Systems User’s Manual Page 4...
8 port 10/100/1000 Ethernet switch (GS1008 or GS1008-TX) User’s manual AC power cord Introduction The Waters’ GS1008 switch is an eight port unmanaged switch which meets all IEEE802.3/u/x/z specifications. The switch has eight 10/100/1000Mbps ports. This workgroup switch will seamlessly integrate with the rest of your network through its auto negotiating and non-blocking design.
If there is a no link status, the possible causes are as follows: The attached device is not powered on. The cable may not be the correct type or is faulty. The installed building premise cable is faulty. The port may be faulty. Waters Network Systems User’s Manual Page 6 GS-1008/GS-1008-TX...
Troubleshooting All Waters’ switching products are designed to provide reliability and consistently high performance in all network environments. The installation of a Waters’ GS1008 and GS1008-TX switch is a straightforward procedure. Should problems develop during installation or operation, this section is intended to help locate, identify and correct these types of problems. Please follow the suggestions listed below prior to contacting your supplier.
2. An accurate list of Waters Network Systems product model(s) involved. Include the date(s) that you purchased the products from your supplier. 3. It is useful to include other network equipment models and related hardware, including personal computers, workstations, terminals and printers; plus, the various network media types being used.
Shipping and Packaging Information Should you need to ship the unit back to Waters Network Systems, please follow these instructions: Package the unit carefully. It is recommended that you use the original container if available. Units should be wrapped in a "bubble-wrap" plastic sheet or bag for shipping protection.
In the event of a malfunction or other indication of product failure attributable directly to faulty materials and/or workmanship, Waters Network Systems will, at its option, repair or replace the defective products or components at no additional charge as set for herein. This limited warranty does not include service to repair damage resulting from accident, disaster, misuse, neglect, lightning, acts of God, tampering or product modification.
Page 11
WATERS NETWORK SYSTEMS’ LIABILITY UNDER THE WARRANTY SHALL BE LIMITED TO PRODUCT REPAIR, OR REPLACEMENT OF THE BUYER’S PURCHASE PRICE. IN NO EVENT SHALL WATERS NETWORK SYSTEMS BE LIABLE FOR THE COST OF PROCUREMENT OF SUBSTITUTE GOODS BY THE CUSTOMER OR FOR ANY CONSEQENTIAL OR INCIDENTAL DAMAGES FOR BREACH OR WARRANTY.
Page 12
ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTHING HEREIN SHALL HAVE THE EFFECT OF LIMITING OR EXCLUDING WATERS’S LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY NEGLIGENCE. Waters Network Systems User’s Manual Page 12 GS-1008/GS-1008-TX...