Table of Contents
Advertisement
Parameter description:
VLAN Name:
Valid letters are A-Z, a-z, 0-9, "
Member:
Used to enable or disable a member port. Enable means the port is a member of the VLAN.
Select the check box (
Add Group:
Create a new port-based VLAN. Input the VLAN name and choose the group member by
selecting the check box beside the port number. Select Apply so the setting will take effect.
Delete Group:
Use Delete to remove the selected group entry from the port-based group table.
Waters Network Systems
-
" and "_" characters. The maximum, length is 15 characters.
)
beside the port x to enable it.
Figure 5.33 – Port-based Group
Figure 5.34 – Port-based VLAN
User's Manual
GSM-2108/GSM-1008SFP
Page 61
Advertisement
Table of Contents
